hello all I hope someone can help me troubleshoot my TV. It's a 4K curved only 2 years old. The power supply is a BN44-00808E.
Symptoms:
Nothing happens when power button is hit. I opened up the back and have poked around and there is no voltage on the stand by pin on the power supply, but there is lots of other voltages that seen right but not for sure. If I unplug the connector going to the Main board the back light comes on, but as soon as I plug it back in the back light goes off. Nothing on the board looks bad. I'm suspecting there is a problem with the stand by circuit.
any help would be much appreciated
Thanks Mark
Symptoms:
Nothing happens when power button is hit. I opened up the back and have poked around and there is no voltage on the stand by pin on the power supply, but there is lots of other voltages that seen right but not for sure. If I unplug the connector going to the Main board the back light comes on, but as soon as I plug it back in the back light goes off. Nothing on the board looks bad. I'm suspecting there is a problem with the stand by circuit.
any help would be much appreciated
Thanks Mark
Comment