View Single Post
Old 04-04-2018, 02:04 PM   #6
Agent24
I see dead caps
 
Agent24's Avatar
 
Join Date: Oct 2007
City & State: Hiding inside a plated-through hole
My Country: New Zealand
Line Voltage: 230VAC 50Hz
I'm a: Hobbyist Tech
Posts: 4,543
Default Re: Shuttle SD36G5M - Mobo died, recapped, still issues

That's a MOSFET. The metallic bit underneath it looks like where the solder has started melting and coming out! I'm not surprised you burned your finger on it. It should not be getting that hot.

Inspect the board where you worked in it and be sure there are no shorts, for example some solder could be bridging pads.

Otherwise, that MOSFET or another connected to it could be damaged or the controller driving it could be bad, or both.
__________________
"Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHorn

Last edited by Agent24; 04-04-2018 at 02:11 PM..
Agent24 is offline   Reply With Quote