Badcaps Forums - View Single Post - Hitachi LE55A6R9A

**R_J** · 11-25-2016, 07:42 PM

Your red probe is in the wrong plug on the meter, it should be in VΩmA NOT 10A DC, That is for measuring current and would put a short on what ever voltage you are trying to measure.
The dial is in the correct place for measuring up to 1000 volts, if the voltage is below 200 volts you can use the 200 volt range

maybe read this http://www.petervis.com/meters/dt830...tructions.html

11-25-2016, 07:42 PM	#5
R_J Badcaps Veteran Join Date: Jun 2012 City & State: ☻ My Country: Canada I'm a: Professional Tech Posts: 5,113	Re: Hitachi LE55A6R9A - No backlight Your red probe is in the wrong plug on the meter, it should be in VΩmA NOT 10A DC, That is for measuring current and would put a short on what ever voltage you are trying to measure. The dial is in the correct place for measuring up to 1000 volts, if the voltage is below 200 volts you can use the 200 volt range maybe read this http://www.petervis.com/meters/dt830...tructions.html Last edited by R_J; 11-25-2016 at 07:49 PM..