Xbox 360 repair attempt

[SM-Piyes90]

Re: Xbox 360 repair attempt

Hey again .

Just like you guys suggested i have bought a rgh chip witch is the cool runner 3 lite .

I heard that there is a lot of chips out there as well as a variety of methods to do the installation .

So with the chip i got , can i install the rgh 1 , rgh 2 or r-jtag ??

[stj]

Re: Xbox 360 repair attempt

go look on the site i linked for error codes - a big wiki there.

you need to j-tag and fit the glitch board.

[SM-Piyes90]

Re: Xbox 360 repair attempt

btw,
if you want it to last - put a spare cpu heatsink on the gpu and put the dvd drive outside the case.
or get rid of the dvd,
jtag/glitchmod the console,
and put your games on the harddrive.
if you get rid of the dvd - remember to jumper ground & "tray-closed" pins on the mobo connector.

hI again , i have successfully installed the chip .

But why do i need to jump ground and tray pin ?

Also witch pin ?

[stj]

Re: Xbox 360 repair attempt

you noly do that if your removing the drive.
you junp tray-in/tray-closed to ground so the system wont keep waiting for the tray to close.

[SM-Piyes90]

Re: Xbox 360 repair attempt

okey