Hp probook 650 g1

[sureshbobby]

Re: Hp probook 650 g1

ok

[sureshbobby]

Re: Hp probook 650 g1

same old story. no display fan runs high speed

[sureshbobby]

Re: Hp probook 650 g1

i have original file am posting it

[peste]

Re: Hp probook 650 g1

i have original file am posting it

try..

[sureshbobby]

Re: Hp probook 650 g1

hi when i connect the keyboard. caps lock is blinking 3 times, i have tried different working rams but no use

[SMDFlea]

Re: Hp probook 650 g1

try this one.

[sureshbobby]

Re: Hp probook 650 g1

guys i have purchased one more new board it is also same issue. what is happening iam getting screwed with this model

[piernov]

Re: Hp probook 650 g1

100% sure using known good compatible DDR3L RAM?

[sureshbobby]

Re: Hp probook 650 g1

i have changed number of rams which are working with other laptops what is happening

[SMDFlea]

Re: Hp probook 650 g1

i have changed number of rams which are working with other laptops what is happening

DDR3L or DDR3 .Use a genuine charger and good,tested power jack.

[bogdan2390]

Re: Hp probook 650 g1

guys i have purchased one more new board it is also same issue. what is happening iam getting screwed with this model

I am wondering if you fixed it. I have the exact model 6050A2566301-MB-A04 which starts and after 30 sec the fan starts spinning very fast.

[e90dima]

Re: Hp probook 650 g1

I need a working dump hp probook 650 G1

6050A2566401-MB-A04

mx25l12873f

Can anyone help?
I cleared the IC before I made a backup.

[axus009]

HP Probook 650 G1 Clean ME Firmware

Hello friends, can someone help me clean ME Firmware this bios, thank you very much.

Model: HP Probook 650 G1
S/N: 5CG551294Z

I attach my original bios.

[pikaczu1122]

Re: Hp probook 650 g1

Hello my Friends.
I need to remove password from hp probook g1 bios.
Can anyone help me? Old bios dump attached below.
I'll be very gratefull.

[SMDFlea]

Re: Hp probook 650 g1

Hello my Friends.
I need to remove password from hp probook g1 bios.
Can anyone help me? Old bios dump attached below.
I'll be very gratefull.

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570

You MUST:

• Read BIOS guides, methods, resources and tools
• Try the method at BIOS guides, methods, resources and tools before requesting help
• Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools

BIOS guides, methods, resources and tools
https://www.badcaps.net/forum/showthread.php?t=103526

3. Password removal by laptop brand
3.6. HP

.

[axus009]

Re: Hp probook 650 g1

Hello friends, can someone help me clean ME Firmware this bios, thank you very much.

Model: HP Probook 650 G1
S/N: 5CG551294Z

I attach my original bios.

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570

You MUST:

• Read BIOS guides, methods, resources and tools
• Try the method at BIOS guides, methods, resources and tools before requesting help
• Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools

BIOS guides, methods, resources and tools
https://www.badcaps.net/forum/showthread.php?t=103526

3. Password removal by laptop brand
3.6. HP

.

I'm trying to clean the bios, but I get this error when creating the image, does anyone know what it is, it's clearly because there are 0's in the boot guard configuration, but does anyone know how to fix it, it's the first clean I'm trying to do , thanks for your help.

[Markus1741]

Re: Hp probook 650 g1

I'm trying to clean the bios, but I get this error when creating the image, does anyone know what it is, it's clearly because there are 0's in the boot guard configuration, but does anyone know how to fix it, it's the first clean I'm trying to do , thanks for your help.

Hello try this file ...

I think the error comes from the wrong FIT version.

You are using 9.1 but it should be 9.0

Good luck ....

[axus009]

Re: Hp probook 650 g1

Hello try this file ...

I think the error comes from the wrong FIT version.

You are using 9.1 but it should be 9.0

Good luck ....

Thanks friend, I just found that the problem was that I was not modifying the "Boot Guard Profile 0 - No_FVME" setting, I already corrected it, I will try to reprogram with my output image and if it doesn't work I will try the one you sent me, I thank you so much.