I've been searching but I still haven't found the schematic or board view files for 820-00928-04 / 829-00928-A
Has anyone the files for this one yet?
Has anyone the files for this one yet?
-
-
Re: Macbook Pro A1707 - 820-00928-04
Did you get it already? I also looking for this one 820-00928. Thanks -
Re: Macbook Pro A1707 - 820-00928-04
I am also in need of finding this as well.Comment
-
Re: Macbook Pro A1707 - 820-00928-04
Use 820-00281.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: Macbook Pro A1707 - 820-00928-04
i owe a lot to this forum.. Its time to payback..
https://drive.google.com/file/d/16gw...ew?usp=sharing
unfortunately i dont have the schematics in PDF.
If anyone has it kindly share please..
Thank you..
Comment
-
Re: Macbook Pro A1707 - 820-00928-04
Hi to all, many thanks @dutcahtech for the board file
Probably someone have pdf file too?
or please can you check Q6000 MOSFET part number, is it DMN32D2LFB4-7?Comment
-
Re: Macbook Pro A1707 - 820-00928-04
Read post #4.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: Macbook Pro A1707 - 820-00928-04
Thanks Mani owe a lot to this forum.. Its time to payback..
https://drive.google.com/file/d/16gw...ew?usp=sharing
unfortunately i dont have the schematics in PDF.
If anyone has it kindly share please..
Thank you..
Comment
-
Re: Macbook Pro A1707 - 820-00928-04
Check theseComment
-
Re: Macbook Pro A1707 - 820-00928-04
schematic in pdfComment
-
Hi guys I have a Macbook a1707 with motherboard 820-00281, without liquid damage that behaves strangely, with the battery connected the Macbook does not turn on and the USBC meter stops at 5v in loop, when I disconnect the battery the Macbook turns on and works fine, I have already tried to replace the battery twice without success, as soon as I connect the black cable of the battery the Macbook does not turn on, it stops at 5v and in loop. -
Hello there
I have problem with Macbook Pro 15" 2017, model 2017, MB code 820-00928.
I bought it as broken with some artefacts on the screen, first I thought that this is problem with ribbon cable but after inspectiing ribbon cable I know it is fine. I tried to reinstall macOs and then I figured out that this must be something with GPU as installation freezes at the end (when drivers are loaded). I installed Windows and was able to install every each of drivers except GPU driver, as soon as I tried to install GPU driver - black screen and restart.
...11-21-2024, 05:25 AM -
Hi,
I'm having an issue with an A1707 MacBook Pro—there's no audio output. Initially, the MacBook came in with a no-power problem, and I found a faulty U6400, which I've now replaced. The laptop now powers on, but there's still no sound.
I've also replaced U6300, but the problem persists.
Here are the current voltage readings:- PPV18_S0: 1.8V
- R6402: 1V
- R6405: 1V
- R6403: 1V
- AUD_SPKRAMP_RESET_L: 1.3V
- PPBUS: 12.6V
-
Hello everyone,
I'm currently diagnosing a MacBook Pro A1707 motherboard that does not power on. I've gathered some data but am stuck and need expert advice.
Note that i'm a beginner in electronics and i'm trying to learn while trying to repair this macbook that my work gave me. I'm really curious and love understanding how thing works and i already learned so much.
Only one usb c port is taking 20v and have 12.5v on PPBUS_G3H. when trying other ports, 2 are not going to 20v and one is going to 20v but the CD3215 is getting really hot.
Observations... -
Hi everyone,
I’m currently having an issue with my MacBook Pro (A1707). It doesn’t power on or make any sounds.- The charger is a generic third-party unit that had a loose connection at the AC input (127VAC). I fixed it, and now it delivers 20VDC to the laptop.
- When connected, the fans spin for about 30 seconds before shutting off.
- No display, no audio, and no signs of life during this time.
Any ideas? Could this be a logic board issue, or is the charger still a problem? Thanks in advance!...08-07-2025, 08:59 AM
Comment