Badcaps Forums

Badcaps Forums (https://www.badcaps.net/forum/index.php)
-   All Others Motherboards (https://www.badcaps.net/forum/forumdisplay.php?f=21)
-   -   EGVA p/n: 141-BL-E757-TR (https://www.badcaps.net/forum/showthread.php?t=72560)

lcdman 10-21-2018 11:31 AM

EGVA p/n: 141-BL-E757-TR
 
5 Attachment(s)
Hello All

I have a EGVA motherboard with a bad diode. The board component number is D11. Does anyone know the part value for this board? EGVA was no help.

Thanks As Always,
Lcdman

lcdman 10-22-2018 07:18 PM

Re: EGVA p/n: 141-BL-E757-TR
 
Hello Again,

Can I just use any three legged diode to replace this one? And no its noted on the board as a diode (D) not a transistor (Q). Anyone want to chime in on this?

Thanks :confused::noob:
Lcdman

momaka 10-31-2018 10:43 PM

Re: EGVA p/n: 141-BL-E757-TR
 
You should trace what circuit/chip it goes to so we can figure it out.

There are many types of SOT-23 diode configurations available - i.e. which pin is Anode/Cathode and whether there are 1 or 2 diodes in that device (since it does have 3 pins). Getting the wrong diode could cause further damage in the circuit, so that's why we have to find out what it should be.

I see it's near Q68, so at this point, I can only assume it possibly has something to do with being part of the RAM voltage regulator circuit.


All times are GMT -6. The time now is 12:51 PM.

Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.