Badcaps Forums

Badcaps Forums (
-   Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals (
-   -   Soyo with Emax PWR0502204001 Caps (

teratosis 07-04-2015 11:30 AM

Soyo with Emax PWR0502204001 Caps
1 Attachment(s)
He there I have a Soyo with an Emax PWR0502204001.

Trying to find the name of the following caps(attachments), but I can't determine what they are.

And the schematic on this page is too small for my bad eyesite.

Can someone please help me identify the caps on the attached image?

c_hegge 07-08-2015 06:20 PM

Re: Soyo with Emax PWR0502204001 Caps
That is not a proper schematic on that page, and it doesn't tell you what the caps are. All it tells you is the physical dimensions of the PCB. You will have to take the board out and see what your one has.

chocolate-fuse 10-16-2018 02:07 PM

Re: Soyo with Emax PWR0502204001 Caps
They are 16V 1000uF for anyone coming across this now. I have the same board and these failed, replacing them gave it another 2 years of life.

Now unfortunately it blows the household circuit breaker when connected to the mains so I'm trying to figure out what else has failed on the board!

chocolate-fuse 10-16-2018 02:31 PM

Re: Soyo with Emax PWR0502204001 Caps
I can't edit my post unfortunately.

Does anyone know what voltage the backlight LEDs run at? I am wondering if I could hook up a 12v and 5v supply to the monitor and use them to directly power the video board and backlights.

Does this sound sensible? I can't find anywhere to get a replacement board.

brethin 10-16-2018 05:02 PM

Re: Soyo with Emax PWR0502204001 Caps
3 year old Necro posting, start a new thread give lots of pics and ask a detailed question.

brethin 10-16-2018 05:04 PM

Re: Soyo with Emax PWR0502204001 Caps
FYI if it's blowing a household breaker it because you have too much load on that breaker.

chocolate-fuse 10-17-2018 09:42 AM

Re: Soyo with Emax PWR0502204001 Caps
Thanks, I'll do that.

When I say it blows the household breaker, I mean it gives off a loud bang, the integrated fuse blows across the room and the breaker flips. I presume there is a dead short on my board but my electronics knowledge + multimeter is not good enough to diagnose it. I will make another post in this forum.

All times are GMT -6. The time now is 12:43 AM.

Powered by vBulletin ®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.