Badcaps Forums

Badcaps Forums (https://www.badcaps.net/forum/index.php)
-   Major Manufacturers Boards (https://www.badcaps.net/forum/forumdisplay.php?f=20)
-   -   Rubycon MCZ compatibles (https://www.badcaps.net/forum/showthread.php?t=71464)

power_coxswain 08-25-2018 12:27 PM

Rubycon MCZ compatibles
 
I am looking for compatibles for the Rubycon MCZ series. I am looking for some Rubycom MCZ 6.3v 1800uf capacitors for a Del GX270 we have. The GX270 is a great unit, does what we need, but recently has started to fail. When rebooted it says it was closed down due to a thermal issue. Looking at the motherboard several of the capacitors have bulging tops so I'm guessing these are the issue. I'm in the UK & see Rubycon ceased the MCZ range a long while ago but I can't seem to find a current replacement for these units. Any help/advice you can give on suitable replacements I could source in the UK would be greatly appreciated.
Thanks in advance.

stj 08-25-2018 01:48 PM

Re: Rubycon MCZ compatibles
 
use polymers, there are no compatables for mcz - it was the best.

Sparkey55 02-17-2019 04:57 AM

Re: Rubycon MCZ compatibles
 
Quote:

Originally Posted by power_coxswain (Post 846801)
I am looking for compatibles for the Rubycon MCZ series. I am looking for some Rubycom MCZ 6.3v 1800uf capacitors for a Del GX270 we have. The GX270 is a great unit, does what we need, but recently has started to fail. When rebooted it says it was closed down due to a thermal issue. Looking at the motherboard several of the capacitors have bulging tops so I'm guessing these are the issue. I'm in the UK & see Rubycon ceased the MCZ range a long while ago but I can't seem to find a current replacement for these units. Any help/advice you can give on suitable replacements I could source in the UK would be greatly appreciated.
Thanks in advance.

http://www.badcaps.net/store/index.php?cPath=37

momaka 02-20-2019 06:29 PM

Re: Rubycon MCZ compatibles
 
Quote:

Originally Posted by stj (Post 846810)
use polymers, there are no compatables for mcz - it was the best.

Only bested by Nichicon HZ... but such small difference isn't really that important.

I agree with regards to using polymers on the GX270. I did one myself like that a long time ago, along with several other Pentium 4 motherboards. Still works fine.

These Fujitsu 2.5V, 820 uF polymers will work and fit fine:
http://www.badcaps.net/store/product...products_id=76
Don't mind their lower capacitance and voltage ratings. The CPU VRM circuit won't have problems with them.

And for the high-side caps (the ones connected to the 4-pin 12V CPU power plug), if needed:
http://www.badcaps.net/store/product...products_id=34


All times are GMT -6. The time now is 03:41 AM.

Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.