LG 50LN5100 Dead help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ivtec
    Badcaps Legend
    • Dec 2008
    • 1967
    • USA
    #1

    LG 50LN5100 Dead help

    Hi guys i found this Lg 50LN5100 out in the curve,and powered it up and there is a red light and i push the power button and i have a quick glow of the screen and turns black,i was checking P201 pins and i have 3.5v pin 1 i had the 12v 24 v but i was shaking when measuring volts and skipped toughed pins 5 6 at same time gnd and 24 v i had a small short i notice a little black on both pins,it mean whatever that was bad on the tv maybe now has more damadge, tv still shows standby red light and when pushing power on it glows the screen for second and goes dead.Any advice please thanks.


    http://www.shopjimmy.com/lg-eay62810...upply-unit.htm


    http://www.shopjimmy.com/lg-ebt62681...0ln5100-ub.htm
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: LG 50LN5100 Dead help

      Images of the boards I cant get on SJ ? Also check how to test the Led backlight voltages sounds to me like a failed Led.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • ivtec
          Badcaps Legend
          • Dec 2008
          • 1967
          • USA
          #3
          Re: LG 50LN5100 Dead help

          Originally posted by ReeceyBurger123
          Images of the boards I cant get on SJ ? Also check how to test the Led backlight voltages sounds to me like a failed Led.
          Thanks reeceyBurger; well i send some pic of the power supply and showing the 2 pins that i tripped and toughed together making a small burn,on the 24v and GND,before i open panel to check for any burned led ,i would like to know what to check for the 24v that were there before i shorted these connections,where is the 24v regulator,i checked all the regulators in circuit with Diode check and they seem to be ok any clues before i go to led panel will be welcome and appreciated, sorry for the pics that are not very good due a crappy camera.
          Attached Files

            Comment

            • ivtec
              Badcaps Legend
              • Dec 2008
              • 1967
              • USA
              #4
              Re: LG 50LN5100 Dead help

              Here a missed pic of the Power board
              Attached Files

                Comment

                Previous template Next

                Related Topics

                Collapse
                • double_DD
                  How can I be sure that my EC chip is dead?
                  by double_DD
                  Hi all,

                  As the title suggests, how can I be sure that my EC chip is really dead?

                  I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

                  Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
                  03-12-2025, 07:47 AM
                • corrize
                  Where to find a very small fpc connector 0.3mm between 2 pins ?
                  by corrize
                  Hello, I search this connector (oxydated).
                  It's a fpc zif low profile connector. It come from camera sensor, it is very small : 0.3mm between 2 pins.
                  I ordered 2 from Aliexpress called « 0.3mm pitch » but one was 0.5mm between 2 pins and the other 0.6mm. In fact « 0.3mm pitch » seams to be the pad width and not the distance between 2 pins.
                  I can't find it. The other websites like mouser dont show the datasheet, and I can't check if it is 0.3mm between 2 pins ?

                  Do you know how to find this connector please ? What is the exact name for find it ?

                  ​...
                  08-06-2024, 05:25 PM
                • disorder
                  ps5 edm-033 dead after hdmi/usb ports destroyed
                  by disorder
                  hello guys,

                  i need help to repair a edm-033 ps2
                  history : as always hdmi port and usb ports destroyed after unplugged
                  after change them, ps5 dead too : 1 beep, no blue light. after inspection 1.8v power was shorted, and because of dead panasonic chip. after remove it : no short anymore
                  so i changed it
                  now i have got 5v stby,, 3.3v stby, 3.3v power, 1.8v power and no short on them
                  but the ps5 is dead again : 1 beep, near 10 seconds with power lines and then off, no blue light ...

                  i don't see any projection of liquid metal on pcb.
                  ...
                  01-14-2025, 12:48 PM
                • tiagooliveira95
                  My first attempt at board repair - Asus Prime X670-P
                  by tiagooliveira95
                  Hey everyone

                  I decided to dive headfirst into board repair. I'm a computer engineering student, and I'm attempting to fix my first board.

                  I have made some progress, and I feel super excited. Still haven't fixed the board tho, but I decided to make a post here to share my progress.

                  This is an X670-P, seller stated bent pins and no power on, the socket has 2 bent pins, the pins are slightly bent upwards (VSS and a Channel A pin), so it's an easy fix, don't even need to replace the socket, tested all power rails on the CPU and found no shorts, the bent pins...
                  Yesterday, 08:20 PM
                • zunasthegreat
                  Chieftec GPS-450-AA with dead 20N60C3
                  by zunasthegreat
                  Hello everyone hope all doing well!
                  I have this PSU (GPS450-AA delta oem) around for like 4-5 years and I had it recapped early 2020 or 2021 with mostly UCC KY and Nichicon PW's. The bulk was and still is fine, the original Ltec's were bloated and empty. The previous issue was some major coil whine noise and at times random shutdowns when going idle. Today it started tripping the mains breaker and I think I have dead APFC mosfets (20N60C3). Right now upon checking I have the Q1 and Q3 FETs dead so far and I guess those are responsible for the PFC circuit. The only thing I care is If there...
                  3 Photos
                  09-01-2024, 07:12 PM
                • Loading...
                • No more items.
                Working...