HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

[bonniedoon]

Hi peoples, I have an A300 that needs to have the NEC Tokin 0E907 replaced. Now I am a novice at this sought of thing, so can some please post a complete fix: this would be from the removal of the Tokin, cleaning the 4 strips and how to solder the 4 new capacitors, including the soldering method, Photos of each stage. Also, what one has to to do to determine the corrects Tantalums. I have seen these Tatalums on ebay where they state them as being a replacement for the Nec Tokin 0E907. http://www.ebay.com.au/itm/4x-SMD-Ta...-/330953629462 Thanks peoples

[diif]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

Read this thread, lots of help in there https://www.badcaps.net/forum/showth...ighlight=tokin
Yes those tantalums are suitable.

[trebo]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

try reading this thread that you first posted into,"https://www.badcaps.net/forum/showthread.php?p=526455#post526455"
Its a long one I know, but the reason being for that is that people on the forum went out of there way to give the information that you are asking for, you only have to browse through it to find loads of detailed info that you require, trust me its all there.

[bonniedoon]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

Thanks peoples, I will peruse those articles and let you know the outcome

[bonniedoon]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

Advice Please, I can get these Caps here in Perth Australia, would these do the job???
http://au.mouser.com/ProductDetail/K...1myMofWw%3D%3D

[diif]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

At 3.1mm i believe they are too tall.

[bonniedoon]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

At 3.1mm i believe they are too tall.

Si I should stick to these http://www.ebay.com.au/itm/4x-SMD-Ta...item35d388d70c

[denilloo]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

This work for me

[diif]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

Si I should stick to these http://www.ebay.com.au/itm/4x-SMD-Ta...item35d388d70c

Yes

[bonniedoon]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

please could someone check these links to see if they would be ok to fix my a300

Thanks

http://au.rs-online.com/web/p/tantal...itors/7887457/

[coelectron]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

please could someone check these links to see if they would be ok to fix my a300

Thanks

http://au.rs-online.com/web/p/tantal...itors/7887457/

it's oK

[LENOVO-A880]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

Hi peoples, I have an A300 that needs to have the NEC Tokin 0E907 replaced. Now I am a novice at this sought of thing, so can some please post a complete fix: this would be from the removal of the Tokin, cleaning the 4 strips and how to solder the 4 new capacitors, including the soldering method, Photos of each stage. Also, what one has to to do to determine the corrects Tantalums. I have seen these Tatalums on ebay where they state them as being a replacement for the Nec Tokin 0E907. http://www.ebay.com.au/itm/4x-SMD-Ta...-/330953629462 Thanks peoples

You can try to use ceramic capacitors to replace your Toshiba Satellite A300 NEC tokin. You can get the replacement capacitors from RS-Components Australia with this PART NO: GRM31CR60J107ME39L. There are some successful testimonials from this forum by just using at least 10 of these ceramic capacitors from these badcaps mega thread...

https://www.badcaps.net/forum/showth...t=8991&page=12

https://www.badcaps.net/forum/attach...1&d=1362533466

and also this one for MSI-CR400 which has the same shutdown problem

https://www.badcaps.net/forum/showpo...&postcount=105

take a look at this... added some on the pads along with the original nec tokin chip but not really neat or just put them all 10 of the capacitors as a replacement for any tantalum one....

https://www.badcaps.net/forum/attach...0&d=1296545075

https://www.badcaps.net/forum/attach...1&d=1362533466

[rievax_60]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

I found that ten of GRM31CR60J107ME39L were needed sometimes.
I have been using four of 2R5TPE330M9 2.5V 330UF for a year or so now.
If a lot are needed, they can be found on AliExpress for good prices.

[bonniedoon]

Re: HELP!!!PLEASE Toshiba A300 and Capacitor Tutorial

Thanks peoples for giving me your inputs, very much appreciated.