ATX Connector Pins

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Maxxarcade
    Badcaps Veteran
    • Jul 2006
    • 973

    #1

    ATX Connector Pins

    Does anyone know what the type of pins in ATX power connectors are? I'm trying to find a Molex part number for them, because I need to build some custom harnesses at work.

    Also could use a part number for the 4 pin drive connectors. I hate splicing wires, and I want to start doing things right.
  • iesaunders
    Member
    • Nov 2006
    • 23

    #2
    Re: ATX Connector Pins

    agreed. I have been searching for this info for awhile too. though not very seriously. I bet you have to order like 10000 at a time too. Which shouldn't be that expensive. I'll start looking again and see what I turn up.

    Comment

    • Maxxarcade
      Badcaps Veteran
      • Jul 2006
      • 973

      #3
      Re: ATX Connector Pins

      I'm sure Digikey will have them for smaller quantities, just have to find a part number. Even knowing what series they are will point in the right direction.

      Comment

      • PeteS in CA
        Badcaps Legend
        • Aug 2005
        • 3579
        • USA, Unsure of Planet

        #4
        Re: ATX Connector Pins

        Molex's series name for the product is "Mini-Fit Jr."
        PeteS in CA

        Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
        ****************************
        To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
        ****************************

        Comment

        Related Topics

        Collapse

        • corrize
          Where to find a very small fpc connector 0.3mm between 2 pins ?
          by corrize
          Hello, I search this connector (oxydated).
          It's a fpc zif low profile connector. It come from camera sensor, it is very small : 0.3mm between 2 pins.
          I ordered 2 from Aliexpress called « 0.3mm pitch » but one was 0.5mm between 2 pins and the other 0.6mm. In fact « 0.3mm pitch » seams to be the pad width and not the distance between 2 pins.
          I can't find it. The other websites like mouser dont show the datasheet, and I can't check if it is 0.3mm between 2 pins ?


          Do you know how to find this connector please ? What is the exact name for find it ?

          ​...
          08-06-2024, 05:25 PM
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • CG2
          Meaco Arete One / Deye Dehumidifier not working
          by CG2
          I've got a dehumidifier that has stopped working. Plug it in, press the power switch, and it beeps 5 times. Nothing showing in the display (which is just two 7 segment displays) apart from the two decimal points flashing. The model is a MeacoDry Arete One 18L, which seems to be a rebadged Deye (all the boards are marked Deye). Here's what I've got so far (details in case anyone else in future should need them).

          Starting with the power board. Mains power comes in at the red connector top left. The compressor is powered by the orange connector to the right of that and is switched by...
          08-17-2024, 07:47 AM
        • ttmi100x
          HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
          by ttmi100x
          Greetings everyone,


          I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


          The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
          Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

          Upon closer inspection...
          07-31-2024, 06:36 PM
        • Tomylee
          No LCD image after connector replacement – lifted components and damaged resistor (Nintendo Switch Lite HDH-CPU-02)
          by Tomylee
          Hi everyone,

          Sorry for the person who’s going to read all this !
          I'm on a Nintendo Switch Lite, motherboard HDH-CPU-02.

          While replacing the left joystick, I had to remove the motherboard to access the connector underneath. When I lifted the LCD connector latch, it broke (the plastic had become brittle over time), so I replaced the entire connector.

          During the desoldering of the LCD connector using hot air, three small components located just below the connector (likely 0402 capacitors) came off and remained stuck to the bottom of the...
          07-11-2025, 11:52 AM
        • Loading...
        • No more items.
        Working...