Abit BE6 causing trouble

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Per Hansson
    Super Moderator
    • Jul 2005
    • 5895
    • Sweden
    #21
    Re: Abit BE6 causing trouble

    There are many revisions of the AGP spec

    Some boards can be plugged into slots that will cause damage, it is not fool proof...
    There have been 3.3v 1.5v and 0.8v slots (agp 2x, 4x & 8x)

    Then there is AGP pro that is larger with more power available (up to 75w if I'm not mistaken)

    So might just be you tried it in an incompatible slot...
    "The one who says it cannot be done should never interrupt the one who is doing it."

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • Foetuss
        Recap motherboards :: Abit KG7-LITE and Soltek SL-75FRN2-L
        by Foetuss
        Hi all

        Hope this is in the correct place.

        I'm planning on recapping both motherboards. I actually already ordered recplament caps for them, where I will be changing out most for poly's.
        Could use some double checking to see if I'm not doing something stupid .

        Pictures of the boards are attached.
        What I will be replacing with what : (planned)

        Soltek Golden ::
        4 1500µF 16V 10mm (5mmL) KZG => APSG160ELL152MJ16S (Chemi-Con 1500µF 16V)
        6 3300µF 6.3V 10mm (5mmL) KZG => APSG160ELL272MJ20S (Chemi-Con 2700µF 16V)...
        2 Photos
        01-18-2025, 11:44 AM
      • ziplock
        Abit BE6-II motherboard
        by ziplock
        Greetings,

        I have an Abit BE6-II motherboard that posts sporadically with the bare minimum components installed - CPU, RAM, PSU, and a Keyboard. I know it posts when the speaker beeps. Re-seating the components has no effect.

        I thought the sporadic posting might be capacitor related. Upon inspection, non of the caps are bulged or leaking and they are all original. So, I pulled them ALL. While the ESR is OK, over half of them are leaking current between 1 and 2 mA. The biggest offenders are way out of spec, like a 1500uf / 6.3V measuring 2600uF and many of the 820uF caps...
        04-20-2025, 02:09 PM
      • Document Archive
        ABit IP35 Pro Motherboard Schematic
        by Document Archive
        ABit IP35 ProABit IP35 Pro Motherboard Schematic
        A motherboard based on the Intel P35 Bearlake-P+ RAID chipset....
        10-31-2024, 02:06 PM
      • tbalint3
        Abit ST6-Raid repair
        by tbalint3
        Hello All,

        I am trying to repair an old Abit ST6-R motherboard.

        The symptoms are the following:
        I got it in a non-working state. I was told that it sometimes turned on, but many times just the CPU fan was spinning and no other signs of life, the board didn't POST, and now it doesn't POST at all.

        It was full of bulged electrolytic capacitors, so I replaced all of them with new Low-ESR ones, but it didn't solve the problem.
        If I install a CPU in the S370 socket, only the fans are spinning and no POST. There are no beep codes even if the RAM DIMMs...
        Measurements on the MOSFETs' legs
        3 Photos
        09-01-2024, 10:03 AM
      • f-bone
        Having trouble with Fujitsu D2703-S BUP bios
        by f-bone
        Hi guys,

        I am having trouble finding a way to create a 512kb bin file from a fujitsu motherboard .BUP file.. I renamed it to zip but there are a few files in the I do not know how to combine to a .bin file.

        Please help.

        BR,
        george...
        03-15-2024, 05:20 AM
      • Loading...
      • No more items.
      Working...