Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

LGA775 CPU's...

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • grss1982
    replied
    Re: LGA775 CPU's...

    Still rockin with a pair of LGA775's here: E8500 and Celeron 430.

    Interestingly enough here in my part of the world LGA775 are still featured as brand new budget builds and not used budget builds. It's mostly Celerons and Pentium Dual Cores though rarely the C2D E7xxx series.

    LGA775 Mobos also still have high availability here. But it's mostly the g41 or g31 based. None of the P45 or P35 anymore.

    Leave a comment:


  • ncovert
    replied
    Re: LGA775 CPU's...

    Originally posted by ratdude747
    "?" If you're asking me why I did , its because I was bored

    Leave a comment:


  • ratdude747
    replied
    Re: LGA775 CPU's...

    Originally posted by ncovert

    Leave a comment:


  • ncovert
    replied
    Re: LGA775 CPU's...

    Leave a comment:


  • ratdude747
    replied
    Re: LGA775 CPU's...

    Originally posted by Topcat
    ^
    In the used market, PGA478 is still alive....I still see socket 7 and socket 370 boards to recap on a regular basis... It just depends on the need.
    embedded?

    for embedded, 386 DOS boxes are still used... I went to a elecronics plant as a college field trip and the pick and place machine on the oldest line (used for small runs) was dos based, likely 386 or 486 based. maybe even 286 or older... at that plant, anything from win 98 to win 7 was typical...

    Leave a comment:


  • Topcat
    replied
    Re: LGA775 CPU's...

    ^
    In the used market, PGA478 is still alive....I still see socket 7 and socket 370 boards to recap on a regular basis... It just depends on the need.

    Leave a comment:


  • ratdude747
    replied
    Re: LGA775 CPU's...

    775 will survive in the used market for a while... but for new builds, 1155 is the intel way to go...

    Leave a comment:


  • c_hegge
    replied
    Re: LGA775 CPU's...

    As a budget biuld I ALWAYS use 1155. s775 boards and CPUs aren't even available here now.

    Leave a comment:


  • Newbie2
    replied
    Re: LGA775 CPU's...

    LGA775 is going to be a thing of the past, just like Socket 478 when LGA775 first came out. LGA775 was still the socket of choice in budget builds up until around now with the Wolfdale Celerons and Pentiums, because the only budget CPU for the short-lived LGA1156 (one of the two sockets that was supposed to replace LGA775) was the Pentium G9650, which wasn't too popular.

    Now that LGA1155 has some pretty potent Sandy Bridge Celerons and Pentiums that outperform the old budget Intel Wolfdale LGA775 processors, I believe that LGA1155 will soon take over from LGA775 on the budget side of things. Also, it will be interesting how the upcoming Ivy Bridge processors are, on LGA1155.
    Last edited by Newbie2; 03-01-2012, 04:05 PM.

    Leave a comment:


  • ncovert
    replied
    Re: LGA775 CPU's...

    Another fun fact: My main PC (which I'm posting this from) still uses a LGA775, but with a BTX standard mobo.

    Leave a comment:


  • ncovert
    replied
    Re: LGA775 CPU's...

    Originally posted by Topcat
    775 is becoming a thing of the past.....like every socket before it. My first experience with a ZIF socket was the socket 3.......before that, it was cramming and praying you didn't rip the legs off the chips...
    Yah, I kinda thought that too, TC. But many businesses that do spreadsheets still like the old 775, because its cheap and straightforward. In fact, NeweggBusiness.com still has 775 workstations
    EDIT: businesses that do bland stuff like spreadsheets and letters, etc.
    Last edited by ncovert; 03-01-2012, 02:40 PM. Reason: more detail

    Leave a comment:


  • RJARRRPCGP
    replied
    Re: LGA775 CPU's...

    LGA 1155 seems to have problems with the pins frying because of poor contact. (Shame on you Intel.)

    IIRC, you will see posts about that at Overclockers.com.

    Leave a comment:


  • Topcat
    replied
    Re: LGA775 CPU's...

    775 is becoming a thing of the past.....like every socket before it. My first experience with a ZIF socket was the socket 3.......before that, it was cramming and praying you didn't rip the legs off the chips...

    Leave a comment:


  • ncovert
    started a poll LGA775 CPU's...

    LGA775 CPU's...

    20
    Yes, I think there's still room for LGA775
    0%
    9
    No, I think LGA1155 is the new standard for budget-but-decent computers
    0%
    11
    Do you think there still is any market room for computers with LGA775 processors? Such as a Pentium or Celeron dualcore. I haven't seen many with a C2D or C2Q for a while. So, what do you think?

Related Topics

Collapse

  • ugamazing
    Procedural question about BGA rework and removal of CPUs
    by ugamazing
    I have been working to develop a consistent and reliable method/workflow for removing, re-balling, and replacing CPUs on various MacBook Pro models (2015-2020).

    I have done OK so far, but there's one detail I need to sort out. I'm hoping someone much more experienced than myself may be able to shed some light:

    I am noticing the pulled CPUs (to be re-balled) come off fine, and they "look" fine as well, immediately when I pull them. However, within a few minutes, after cooling, the CPU chips develop a very, very slight curve/bend. It's SO SLIGHT, maybe a 1-2%...
    07-12-2022, 03:11 PM
  • Nebukadnerzar_V
    Dell Optiplex 760 USFF BIOS Mod Request for QuadCore CPUs
    by Nebukadnerzar_V
    Hi guys!
    I have a Dell Optiplex 760 USFF (Ultra-Small Form-Factor).
    It currently only supports Dual-Core CPUs and will halt with an error message, when a QuadCore is installed.

    I have seen people running QuadCores in these machines, but the BIOS needs to be modded.
    Since I have not found the modded BIOS to download anywhere, I am asking you guys for help:

    Could you please add support for QuadCore CPUs (in my case the Core2Quad Q9550) to the BIOS?

    I have attached the Dump of my machine.

    S/N: SRW2K4J
    Reg Model: DCTR...
    09-27-2024, 02:43 AM
  • vossile
    LG OLED 65C7D electronics troubleshooting
    by vossile
    So I picked up this TV for free from somebody who had given up. No picture. The previous owner said that he could not get it to work, but he had supposedly tested all the PCBs in another TV (55" version as I heard during our talk - I have no idea if this is possible maybe a pro can clarify for me). I found some bent/crossed contact on the top LVDS cable from the T-Con to the Mainboard and corrected them best I could. Measurement seem to confirm that I have continuity from the MB to the T-Con on those lines (I have to admit it's a tad difficult).
    To be sure, I did inspect all the flat...
    06-28-2026, 02:19 AM
  • Boardview and Schematic Bot
    Texas Instruments bq24745 bq24745RHDR bq24745RHDT Battery Charger IC for Laptop Computers Datasheet
    by Boardview and Schematic Bot
    The bq24745 bq24745RHDR bq24745RHDT is a high-efficiency, synchronous battery charger with an integrated input-current comparator, offering low component count for space-constrained, multi-chemistry battery-charging applications. The input-current, charge-current, and charge-voltage DACs allow very high regulation accuracies that can be easily programmed by the system power-management microcontroller using the SMBus interface. The bq24745 charges two, three, or four series Li+ cells, and is available in a 28-pin, 5-mm x 5 mm QFN package.

    The bq24745 features dynamic power management...
    10-23-2024, 02:50 AM
  • ducky29
    Working with Bga chips especially CPUS
    by ducky29
    Hello. I mostly do small electronics and tv repairs. I am confident with small bga chips but I never was successful with removing large chips especially cpus. Is it possible to remove them just using a preheater and hot air gun or I need something more advanced like a bga machine with temperature profiles, cooling fans, etc etc.


    Any suggestion on aliexpress/ebay are welcomed. I am on a tight budget, max I can do is about 200$. Please anyone with more experience can give me some suggestions?

    Thanks in advance.
    09-23-2024, 03:56 PM
  • Loading...
  • No more items.
Working...