emachine e725 freezes randomly

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • RJARRRPCGP
    replied
    Re: emachine e725 freezes randomly

    Originally posted by Th3_uN1Qu3
    Win98 still sucks for most serious intents and purposes. Heck, it even fails at surfing the 'net nowadays.
    That's true if you don't use 98Lite!

    98Lite removes a bunch of stuff that makes it vulnerable to malware and basically turns Windows 98 into a portable OS with basically only the kernel and app running.

    Then afterwards, Windows 98 requires one more tweak with the networking settings, because, yes, it will be slow as heck, there's an issue with the default settings that causes broadband to crawl at 2 Mbit or less!

    98Lite will work like a charm on Intel 845 boards and PIII boards!

    After I got all the tweaks I needed, including from MSFN, the 98Lite'ed Windows 98 SE on the MSI 845E Max with a Northwood beats even Windows 2000 in benchmarks and is faster overall.

    The only time I get errors is when the Northwood temp starts getting too high when I'm Prime95'ing it.

    It starts getting finicky at 2.8 Ghz and I need a lot of cold air for Prime95 to pass.
    Last edited by RJARRRPCGP; 10-07-2011, 10:13 AM.

    Leave a comment:


  • coolcurrent
    replied
    Re: emachine e725 freezes randomly

    thanks all, i finally gave this up.i just told the person to buy another laptop

    Leave a comment:


  • PCBONEZ
    replied
    Re: emachine e725 freezes randomly

    Originally posted by coolcurrent
    the laptop doesn't recognize any CD now. i will try it again after i assemble it.
    You may have a bad drive or a defective cable [or connector] to it.
    -
    Is the CD drive mounted in a caddy on that model?
    .

    Leave a comment:


  • PCBONEZ
    replied
    Re: emachine e725 freezes randomly

    Laptops usually use thermal pads.

    Examples:
    http://cgi.ebay.com/310238536049
    http://cgi.ebay.com/270630084432
    http://cgi.ebay.com/190539759573

    .

    Leave a comment:


  • coolcurrent
    replied
    Re: emachine e725 freezes randomly

    Originally posted by joshnz
    It is known as
    Thermal Compound
    Thermal Grease
    Thermal Paste
    thanks

    Leave a comment:


  • coolcurrent
    replied
    Re: emachine e725 freezes randomly

    Originally posted by PCBONEZ
    It's not unrelated.
    You don't have enough RAM to run Win7 smoothly particularly after you start adding programs to it.
    -
    You have the minimum requirement which just enough for Win7 to run without adding any[or many] other programs to it.
    .
    Pretty much any 'resource happy' program [a bulky anti-virus for example] would be enough to cause your system to freeze.

    .
    Try running the system from a live CD and see if it freezes with that.
    If it doesn't the issue isn't hardware.
    .
    the laptop doesn't recognize any CD now. i will try it again after i assemble it.

    Leave a comment:


  • joshnz
    replied
    Re: emachine e725 freezes randomly

    It is known as
    Thermal Compound
    Thermal Grease
    Thermal Paste

    Leave a comment:


  • coolcurrent
    replied
    Re: emachine e725 freezes randomly

    i opened the laptop, the paste (whitish) on the processor seems to be dried up, what is it usually called, i need to get it and re-paste first.

    the laptop is new and virtually have no dust clogging anywhere. thanks

    Leave a comment:


  • PCBONEZ
    replied
    Re: emachine e725 freezes randomly

    Originally posted by coolcurrent
    i don't understand, how does all these relates to emachines freezing
    It's not unrelated.
    You don't have enough RAM to run Win7 smoothly particularly after you start adding programs to it.
    -
    You have the minimum requirement which just enough for Win7 to run without adding any[or many] other programs to it.
    .
    Pretty much any 'resource happy' program [a bulky anti-virus for example] would be enough to cause your system to freeze.

    .
    Try running the system from a live CD and see if it freezes with that.
    If it doesn't the issue isn't hardware.
    .
    Last edited by PCBONEZ; 06-25-2011, 03:49 PM.

    Leave a comment:


  • joshnz
    replied
    Re: emachine e725 freezes randomly

    None of it does sadly a moderator should move those posts out.

    as for your machine coolcurrent have you had any issues with this machine in the past like blue screens and resets?
    Also go to start Control Panel then Administrative Tools then Event Viewer then windows logs then system and look for any errors regarding disk.
    Last edited by joshnz; 06-25-2011, 01:00 PM.

    Leave a comment:


  • coolcurrent
    replied
    Re: emachine e725 freezes randomly

    i don't understand, how does all these relates to emachines freezing

    Leave a comment:


  • PCBONEZ
    replied
    Re: emachine e725 freezes randomly

    Ever hear of when it works don't fix it?
    Good plan when you run a business.
    .

    Leave a comment:


  • pfrcom
    replied
    Re: emachine e725 freezes randomly

    Originally posted by PCBONEZ
    So obviously what they had last year didn't work and they went right out of business.
    - It's a WANT, not a need.
    Ever hear of a factor called growth ?

    Leave a comment:


  • Th3_uN1Qu3
    replied
    Re: emachine e725 freezes randomly

    I will avoid getting into such discussions in the future, because they don't change the systems i run in any way and just cause unneeded clutter.

    Leave a comment:


  • shadow
    replied
    Re: emachine e725 freezes randomly

    Yes this 32bit vs. 64bit discussion is interesting. However it is not the purpose of this thread.

    Leave a comment:


  • joshnz
    replied
    Re: emachine e725 freezes randomly

    mods could you clean this thread up and put the posts in a 32 vs 64 thread this guy coolcurrent may have already left because of the thread been taken over.

    Leave a comment:


  • PCBONEZ
    replied
    Re: emachine e725 freezes randomly

    Now that the train wreck is over....

    coolcurrent, any updates?

    .

    Leave a comment:


  • ratdude747
    replied
    Re: emachine e725 freezes randomly

    Originally posted by PCBONEZ
    RD I was specifically talking about device drivers.
    Win7 does not support 32-bit drivers at all.
    http://www.techsupportalert.com/cont...plications.htm
    well, yeah, in the word of cpu's, 00000wow and 0wow are not the same. in 64 bit, ALL 64 bits must have a value. as floating bits are not defined nor defaulted. so ANYTHING 32 bit will not work without translating. windows IIRC will translate programs but not drivers, hence the issue.

    what "legacy mode" in the cpu does is add the zeroes. but once you start the computer in a mode, it stays in that mode until reboot. so once you start 64, you have to always be 64.

    also, since 7 is a hybred kernel, other things besides the OS may interact with drivers and need 64 bit capabilities

    also, there may be bits that making 64 bit and using 64 bit instructions improved performance or functionality enough to warrant changing. but so much does not benefit enough to warrant that it rounds off to double . no big enough to make a large impact on memory usage, but enough to mess up drivers.
    Last edited by ratdude747; 06-25-2011, 03:47 AM.

    Leave a comment:


  • PCBONEZ
    replied
    Re: emachine e725 freezes randomly

    RD I was specifically talking about device drivers.
    Win7 64-bit does not support 32-bit drivers at all.
    http://www.techsupportalert.com/cont...plications.htm
    Last edited by PCBONEZ; 06-25-2011, 03:41 AM.

    Leave a comment:


  • Th3_uN1Qu3
    replied
    Re: emachine e725 freezes randomly

    Originally posted by PCBONEZ
    If you have more than 4Gb it probably is idle most of the time.
    Don't bet on it. Using virtual machines eats up a lot of RAM. But at least i don't have to worry 'bout no compatibility issues.

    Originally posted by PCBONEZ
    [For the average typical PC user I'd say 2Gb.]
    This is true, sans VMWare i can do most of my stuff in 2GB (on my laptops). Though i DO feel the pagefile every once in a while with 2 gigs. 8GB on the main machine and pagefile turned off. I have never seen an "out of memory" message, but i did use up to 7.3GB once. Don't ask me what i was up to. Again, RAM is still cheaper than CPU power.

    Leave a comment:

Related Topics

Collapse

  • grosseader
    MSI B450 Gaming Plus Max - freezes randomly
    by grosseader
    Hello everyone, i got this mobo for long time, now i decided to rearrange some hardware and build a office pc, but 1 week so far, this motherboard drives me crazy.

    What is the issue:
    PC freezes randomly. While loading win, while installing win, while in windows , and just once did it while in bios.

    Hardware:
    MSI B450 Gaming Plus Max , MSI A320m A-pro
    BIOS : 7B86vHG - latest
    CPU: Ryzen 3 1200, 3200G , Ryzen 5 3500x, Ryzen 5 5500
    GPU: Vega 7 in 3200g and MSI 1060 6GB
    RAM: 2x8 ADATA spectrix 3000 , 2x8 SiliconePower 3200
    ...
    01-30-2023, 03:24 PM
  • pcwhiz24
    Lenovo IdeaPad 3 14ADA05 NVME keeps randomly disconnecting
    by pcwhiz24
    This issue has me stumped! I have this Lenovo IdeaPad and the SSD (NVME) keeps on randomly disconnecting. It'll stop being detected in BIOS randomly and when I turn it off and back on sometimes it'll detect again and boot up just fine...only to crash after a few minutes and either boot again or stop being detected.

    Things I tried so far:

    - Reset the CMOS by removing battery, held power buttons 60 seconds, all that jazz.
    - BIOS is fully updated (had to use CHA341 because I bricked it the first time trying to update it)
    - Tried multiple working NVME drives...
    04-08-2025, 06:59 PM
  • amingpx
    hp probook 6555b freezes randomly
    by amingpx
    hi guys...hp probook 6555b freezes randomly and no key on the keyboard doesnt work..sometimes after 30min somtime after 60min and sometime after 20min..i chech out pads on.the cpu and vga chip..fan is ok...i flash bios..i changed ram..hard...i dont know any more..help me
    04-03-2020, 05:38 AM
  • tvguy12012012120
    Zombie Samsung UN55NU6900F dead / no standby voltage - randomly came to life after hours of troubleshooting then died
    by tvguy12012012120
    This is my first attempt at troubleshooting a board like this, I know I could just buy a new board but I'm curious to figure out how this works. I've been testing different components in the evenings this week and I think the problem is with the IC failing to start up for some reason. When the board is plugged in there is no standby voltage.

    Then today it randomly sprung to life like a zombie but shortly died thereafter. I have no idea why it would have done that and its the first time I've seen it running. I discharged capacitors on the board last night, then it was sitting today....
    02-07-2025, 05:13 PM
  • hinisa
    Xiaomi router freezes at boot after re-capping
    by hinisa
    I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

    When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

    After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



    Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...
    07-08-2023, 05:58 AM
  • Loading...
  • No more items.
Working...