SATA doesnt work
I have a prescott 800 Mother board (P4VM800) doesn't detect SATA Hard Disk, I already upgrade the Bios from Ver 1.1 to 1.6 and I already test the HDD to other PC and its working. any body could help me what to do with my Prescott 800 Mother board?
-
-
Re: SATA doesnt work
You're talking about ICH5 which is only SATA150. Some of the newer hard drives have jumpers on the back to force it into sata150 mode for compatibility. Yes, I know it's supposed to be backwards compatible, but this just isn't the case. Even the drives with the jumpers don't work many times. In that case you'll need a cheap SATA PCI card. -
Re: SATA doesnt work
Thanks its now workingComment
-
Re: SATA doesnt work
Glad you got it to work.Comment
-
Hi,
I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
The board is generally working now, all PCIe ports are working, Windows installs normally.
However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA... -
This specification for the HP Z2 G4 + 3TB SATA 6Gb/s 7200 HDD can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Z2 G4 + 3TB SATA 6Gb/s 7200 HDD boardview and Z2 G4 + 3TB SATA 6Gb/s 7200 HDD schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...09-12-2024, 03:28 PM
-
Hello, I have an "ASUS ROG Strix G713QR" laptop, and for approx. 3 months I have the following problems:
1. Laptop keyboard doesn't work
2. The backlight on the laptop keyboard doesn't work
3. The x2 side LEDs (red) on the laptop don't work
The power button works, the touchpad works, and all the USB, HDMI, Ethernet, etc. ports work.
I already tried to reinstall all the drivers and reinstall Windows. So I don't know what to try anymore that is software-related.
But I am strongly aiming that it is somehow a BIOS-related problem,... -
hello everyone, I have a particular problem with this lenovo ideapad 330s-15ikb. I had to replace the motherboard due to liquid damage, after replacing it I noticed that some letters on the keyboard do not work. So I bought a new keyboard and now all the keys work except the numeric keypad area. In practice the num lock key LED always remains on and the numbers do not work. Has anything like this ever happened to you? I also tried changing the keyboard again but the same defect remains on the numeric keypad.
I tried updating the bios but the problem remains
https://s... -
I just bought a used one for a decent price for a used device it prints very nicely and clean and clearly so I am not going to complain about it but I would like to get it working again anyone have any suggestions on how to repair this back light
If I can not get the controller to work properly then I will probably have an external power supply for the backlight because it is difficult to see the screen without out it
One —>the LEDs might be bad
Two —> the buck converter or regular might be bad
Three —> the controller might not...
Comment