Current project is almost all Nichicon VX capacitors (20%) which appear to be discontinued. Any recommendations for a high quality replacement? Thanks
-
-
do you need axial casings or does the board have holes for radials?
the VX is nothing special, just a 105' temp rating.
-
From what I have seen so far, Axial.Comment
-
Vishay seems to be the brand with the largest range, Cornell Dubilier also has a decent amount, and Kemet and Epcos have half each of that again.
Which one is the best quality brand from those four? No idea, but I'd trust them over the average Chinese junk."Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHornComment
-
Thank youComment
-
Nichicon's current 105C general purpose series seem to be the UVZ and UVY series.PeteS in CA
Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
****************************
To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
****************************Comment
-
Those aren't axial though..."Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHornComment
-
Hi group,
I am looking for a replacement for Nichicon PLV1J220MCL1TD (22uF, 63V, Conductive Poymer Aluminum Solid Electrolytic, 8x9 but we can go up to 8x11).
While searching, I found some APAQ and ELITE replacements that would fit on our products (APAQ ARHA series and ELITE UGT and UPD series).
How good are these brand/series and what other alternative would you recommend? I've searched the big name already and didn't find an equivalent.
Thanks!05-27-2024, 08:08 AM -
Capacitor has been discontinued (EGXF101ELL331MM20S) all of the replacements I have found have are smaller than 0.709" Dia (18.00mm). I would like to use the same size or at least close to the same size Capacitor. 19mm would be too big as they would touch and not be able to through hole mount. Tia...
-
I need to order some because my parts bin is getting very low on this value
Thanks to anyone that can help
Dig key is out of stock and so is Mouser Electronics is also out of stock as well
I found some from a eBay seller that shows the box that 3000 of them are boxed in I think I should be alright buying them from this seller -
Received a Insignia NS-24E40SNA14 24" Class LED HDTV LCD HD TV because the power supply got lost in moving.
Fortunately there are a number of replacements for it. They include
Newegg AC DC Adapter for Insignia NS-24E40SNA14 24 Class LED HDTV LCD HD TV Power Cord https://www.newegg.com/p/14R-02MY-001N9
Amazon UpBright New Global 12V AC/DC Adapter Replacement for Insignia NS-24E40SNA14 24" Class LED HDTV LCD HD TV 12VDC 3000mA 12.0V 3.0A Power Supply Cord Cable PS Charger Mains PSU https://www.amazon.com/UpBright-Adap...4E40SNA14-Char... -
Greetings everyone:
I have a Polycom formerly Obihai Obi202 VoIP Adapter which has the following 2 capacitors:
1 x ChengX 100uF 25V 0.25"Wx0.3125"H
1 x YST 10uF 50V 0.1875"Wx0.4375"H
What are suitable replacements that are long life and rated 105C or higher? Am I correct that the uF has to match but the voltage can be the same or higher? Are there any advantages and disadvantages if it's higher than the original voltage?
Thanks!
Comment