Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

Which caps to replace: ECS P4M800Pro-M V1.0A

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jonny124
    Member
    • Feb 2026
    • 14
    • Italy

    #41
    Originally posted by stj
    install Linux so it creates a crashlog.
    and try running memtestx86+ on it
    Honestly what can it do to help me? The system just resets randomly after some time with 200mhz (no bsod, just hard reset) anything higher cant even boot the OS, dont really want to bother with Linux if we know the issue is hardware already, RAM was tested at 533mhz with Pentium 4 and gave no errors (tm5 anta777 extreme + memtestx86 bootable cd).
    Tried pentium d with 1 stick DDR2, 2 sticks, 1 stick DDR1 and 2 sticks DDR1, always same behaviour even if CPU is locked at 800mhz by setting speedstep to "minimum".

    Comment

    • jonny124
      Member
      • Feb 2026
      • 14
      • Italy

      #42
      At this point might just be faulty CPU who knows, why cant it boot anything past 200mhz or even has difficulties like locking up in the BIOS? Its not using much power to stress VRM in this state, maybe memory controller inside CPU is just damaged

      Comment

      • stj
        Great Sage 齊天大聖
        • Dec 2009
        • 32069
        • Albion

        #43
        you could scope the vrm output,
        if it's weak then upgrading the fets or inductors may fix it

        Comment

        • jonny124
          Member
          • Feb 2026
          • 14
          • Italy

          #44
          Originally posted by stj
          you could scope the vrm output,
          if it's weak then upgrading the fets or inductors may fix it
          I dont have oscilloscope to test the phases, but i could replace the mosfets, the Rev 2.0 has all mosfets slot populated and also claims support for more Core 2 CPUs, the Rev 1.0 looks almost identical just with less mosfets (but it does have extra available spots for them), i wanted to get schematic but the only ECS Rev 1.0A i found is on Vinafix which requires payment to download

          Comment

          • ChaosLegionnaire
            HC Overclocker
            • Jul 2012
            • 3298
            • Singapore

            #45
            well i think it looks like now if anyone on the internet has ever gotten that board to work with a pd cpu reliably and stably being the key words. if no one has ever seen that, then its just false advertising on ecs' part.

            i could say my cpu is compatible with donkeys and monkeys but has anyone ever seen a donkey or a monkey use a computer? so basically, anyone can say whatever they like but whether that is true or not or will it become true or not, people will have to see it and judge for themselves.

            also a pentium d doesnt have a mem controller in the cpu. for intel, that only started much later with the core i7 series. so i guess this settles it for this board. it will only boot to bios with a pd cpu but cant boot an os properly, so this is strictly a single core p4 board only. if u wanna run pd, plenty of other better boards out there that will run it like the gigabyte 945p-s3, 945p-ds3, 965p-s3 and 965p-ds3.

            Comment

            • jonny124
              Member
              • Feb 2026
              • 14
              • Italy

              #46
              Originally posted by ChaosLegionnaire
              well i think it looks like now if anyone on the internet has ever gotten that board to work with a pd cpu reliably and stably being the key words. if no one has ever seen that, then its just false advertising on ecs' part.

              i could say my cpu is compatible with donkeys and monkeys but has anyone ever seen a donkey or a monkey use a computer? so basically, anyone can say whatever they like but whether that is true or not or will it become true or not, people will have to see it and judge for themselves.

              also a pentium d doesnt have a mem controller in the cpu. for intel, that only started much later with the core i7 series. so i guess this settles it for this board. it will only boot to bios with a pd cpu but cant boot an os properly, so this is strictly a single core p4 board only. if u wanna run pd, plenty of other better boards out there that will run it like the gigabyte 945p-s3, 945p-ds3, 965p-s3 and 965p-ds3.
              There were people who got it running stable with Pentium D according to decade old posts, however those same people had to return the board before getting one that ran the CPU in a stable way, why we don't know but it would also be strange of them to offer a Pentium D bundled with this board at Fry's back in 2006 (most forum posts you find talking about ECS are guys who got the board for this exact reason).
              But anyways i already found another guy selling some hw bundle which include a board and 2 775 CPUs, a core 2 duo E6xxx something and a pentium dual code, i will try both in the ECS board just for a final test if not then i will put this new G35 mobo.
              Maybe some specific revisions of the P4M800PRO chipset have some fault and that's why they have issues with different CPUs, otherwise it makes no sense to me that someone just RMA the board and the new one works as expected.

              Comment

              • stj
                Great Sage 齊天大聖
                • Dec 2009
                • 32069
                • Albion

                #47
                try getting the chipset datasheets

                Comment

                • jonny124
                  Member
                  • Feb 2026
                  • 14
                  • Italy

                  #48
                  Found this comment from someone on VOGONS forum:
                  I recently found out that 775 VIA chipsets are unstable with a 1066 bus. This mainly concerns chipsets released before 2007 +/-.
                  I found out this on P5VDC-MX V2.0 motherboard with P4M800PRO chipset, that was released at the end of 2004 and it was modified version of P4M800 chipset that released in 2003.
                  If you set for example Core 2 Quad Q6600 (or maybe Core 2 Duo E6600) on P5VDC-MX V2.0, that supports Core 2 CPUs, an unpredictable reboot may occur at any moment. But possibility of this reload decreases with lower bus frequency and later chipset's release date (somewhere around 2007). This problem maybe comes from 2003, when Gallatin 1066 bus was supported by Intel for exapmle 865 chipset, but VIA not aimed on that frequency and this problem was fixed in later chipsets but not completely (mainly fixed by newer production technology)
                  P4M890 and P4M900 chipsets have the same problem, but I have never seen motherboard on these chipsets with changeable bus frequency to the downside. Reload problem with 1066 can may occur after weeks or months of use, but more often appears under load. This makes VIA chipsets on 1066 MHz unreliable.
                  So latest absolutely stable bus frequency on VIA is 800 (but I saw posts with ECS P4M900T-M2 mobo that suddenly stopped working with Core 2 Quad CPU's and only started with 533 bus, but this is not beacause of caps, power, memory, BIOS or something like that, thats very interesting)​
                  So it appears my theory is correct, some early revision of P4M800Pro chipset are unstable, and later manufactured model fix the issues with 1066FSB, i also found an article in fact were it's mentioned in the Chipset diagram / datasheet that it supports 1066FSB, but in original VIA announcement on their website they listed max 800FSB, so definitely they did an oopsie in some earlier silicon and instead of wasting stock and using fixed ICs they dediced to hide this issue and maybe hope that owners of early revision P4M800PRO will never try 1066FSB CPU

                  Comment

                  Related Topics

                  Collapse

                  Working...