A7M266 16V 1200uF

[S33K3R]

I have the following motherboard - A7M266
A cap fell of do to handling and I would like to replace it.
The cap is a 16V 1200uF.
My question is would a 16V 1000uF work or will it cause some sort of problem?

Thanks all in advance

[Topcat]

A 1000uF in place of a 1200uF will more than likely be OK, 1000 is borderline on the 20% tolerance of 1200. If possible, go up to 1500uF. NEVER decrease the voltage unless you know what you're doing.

[S33K3R]

will increase have any ill affect? I believe the cap is used as a filter on the motherboard

thank you for your advice