Mlt169b rev. 1.2

[charlz]

Please help me with the original values of these caps. EC14, EC10, EC9, EC20, EC19, EC18, EC25.
the model number of the board is MLT169B REV. 1.1 2006.05.13[/QUOTE]
Someone worked on this board before and I am not sure the correct values.

[selldoor]

Re: Mlt169b rev. 1.2

Perhaps post a good clear picture - ring & label the positions.
Make a list of what caps you have in which positions now.
What problems does the set exhibit.

DO NOT POST THE SAME QUESTION IN MORE THAN ONE THREAD

Decide which one you want to continue with.

[charlz]

Re: Mlt169b rev. 1.2

someone worked on this power supply and replaced these caps. The set is freezing and I found the 220 uf * 2 caps bad. I want to fix the power supply unit then I can procceed. It seems the 24 volts line is not ok. He replace the 3 front caps with 820 uf 35v.

[selldoor]

Re: Mlt169b rev. 1.2

Yes but what are the board numbers for the caps - cant read them on your picture.
For example which is E14 etc that is why I want you to anotate a picture

[charlz]

Re: Mlt169b rev. 1.2

Ec14, ec9, ec10, ec25

[selldoor]

Re: Mlt169b rev. 1.2

I know which are ec8 and ec9 where are the others?

Do you not understand english? Enlarge the picture I have changed it

[charlz]

Re: Mlt169b rev. 1.2

I do. Those are the board numbers. ec14, ec10 and ec9 are in the 24v line. the middle row of the secondary power supply are the 3 1000 uf 16v in the 5v line.

[selldoor]

Re: Mlt169b rev. 1.2

ok - I have done some research and have the following

EC1? next L6 470uf 35v EC10 1000uf 35v EC9 1000uf 35v


EC25 470uf 35v


Middle rowUnder heatsinks 1000uf 16v *3

[charlz]

Re: Mlt169b rev. 1.2

Thank you so much, I have only one cap left and that is ec14.

[selldoor]

Re: Mlt169b rev. 1.2

Which is EC14 can you mark it on the picture, like I asked?