CapXon higher ripple?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • J_K_M_A_N
    Member
    • Apr 2012
    • 17
    • USA
    #1

    CapXon higher ripple?

    I am trying to replace 3 CapXon LZ series 1000uF 10V 10x12.5 capacitors and it is tough finding ones to match the ripple. The CapXon ones are 1500 ripple and the only thing I could find were these which are 10x16 (hopefully I have space for that height).

    Do the CapXon have a higher ripple than other capacitors? Am I just not looking in the right places? Can I try a lower ripple with a better capacitor?

    J_K_M_A_N
    Tags: None
    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271
      #2
      Re: CapXon higher ripple?

      Nichicon HN according to



      is available in 10x12.50mm with 1760ma.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

        Comment

        • mariushm
          Badcaps Legend
          • May 2011
          • 3799
          #3
          Re: CapXon higher ripple?

          The one you selected will work.

          This one will also work at 10x16:

          http://search.digikey.com/us/en/prod...398-ND/2433532 (yes, it's rated for 16v, it will work fine)

          Newark has some options, 16v and 10x16 but again, higher v is fine.

          http://www.newark.com/panasonic/eeuf...r%20Capacitors
          http://www.newark.com/rubycon/16zlh1...w%20Capacitors

          This one will also work from the Badcaps store: https://www.badcaps.net/store/produc...roducts_id=174

            Comment

            • J_K_M_A_N
              Member
              • Apr 2012
              • 17
              • USA
              #4
              Re: CapXon higher ripple?

              Originally posted by retiredcaps
              Nichicon HN according to



              is available in 10x12.50mm with 1760ma.
              I can't seem to find those anywhere online though. Not even if I wanted to order 500 (which I don't )

              J_K_M_A_N

                Comment

                Previous template Next

                Related Topics

                Collapse
                • momaka
                  HannStar Hanns-G HC194d LCD monitor repair
                  by momaka
                  Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
                  03-15-2023, 10:17 PM
                • Ady2017
                  Is it ok to use a capacitor with a much higher ripple?
                  by Ady2017
                  Hi all

                  I am trying to source some new caps for the power board on my LG TV. The one I am currently struggling to find a replacement for has the specs:
                  Sam Young KMG 680uf 50V with a rated ripple current of 973. According to the catalogue these seem to be a general purpose capacitor and it is not clear why LG have used them on the power board.

                  I like to use Panasonic capacitors but most of these have got a ripple voltage of 2-3 times the figure of the original capacitor. My preferred FR capacitors are 3160 while the FC ones are 2215. Would going from 973 to...
                  10-30-2021, 10:46 AM
                • chth96
                  Is it no harm to replace with capacitor without ripple current rating?
                  by chth96
                  When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.


                  Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
                  But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
                  Rubycon YK DataSheet (b...
                  04-19-2024, 05:19 AM
                • Antonynl
                  What are typical ripple voltages on a laptop motherboard?
                  by Antonynl
                  I have here a HP pavilion hp 15-cs2975nd with a 1.095v power supply that is driven by a FDMF3035. I do see about 80mV of ripple on my scope. I searched through the datasheet to find possible values of the ripple but I don't understand the datasheet well enough.

                  So I have two questions:
                  1) what is the typical ripple voltages of gpu/cpu on a laptop or pc mobo?
                  2) what would be the max ripple of a FDMF3035 that drives an output of 1.095V?

                  Would be nice to have a rule of thumb of say a percentage of the supply voltage to be an acceptable ripple voltage....
                  12-09-2022, 06:51 AM
                • ADV
                  Acer Ferrari F-20" monitor display interference and replacement capacitor selection
                  by ADV
                  Good day everybody

                  I hope I'm posting in the right section - I am new to this awesome forum.

                  I have received an ACER Ferrari F-20" LCD Monitor to repair.

                  It produces interference lines on the image displayed and slowly rotates across the whole screen, with respect to the center of the screen. One rotation takes about 4 minutes and the cycle repeats over and over.
                  For some reason the On Screen Display Menu is not affected when switched on with the Menu button.

                  I opened the external 18V power supply and see no bulged capacitors...
                  11-02-2021, 09:32 AM
                • Loading...
                • No more items.
                Working...