K7s41gx2_boot_problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hb9mfl
    New Member
    • Dec 2010
    • 3
    #1

    K7s41gx2_boot_problem

    Hi,
    I have here a pc who does not boot every time.
    Attached a ppt with pictures of some of the Cs.
    Some look no more good for my eyes but I am not sure.
    Are those with the caps nor more flat already
    the cause of the problem I have?
    If the PC comes up all is working fine.
    Thank you Armin hb9mfl
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • dclass-pro
      HP 440 G2 no power after short in flat lcd
      by dclass-pro
      Hi all guys, I need your help. On a HP 440 G2 - LA-B181P laptop I was changing the speakers and the pc worked fine everything ok.
      After closing it all with all the screws I realized that it would no longer turn on. I opened it and found that the flat cable of the LCD was shorted. I ordered a new flat but the motherboard still won't turn on, as soon as I connect the power supply the connector LED always flashes and the power button stays on.
      I tried to check the voltages and the 3v and 5v are there, on the battery pin (with no battery connected) I have about 2v.
      I tried to...
      08-11-2023, 07:47 AM
    • reformatt
      A2337 not working with flat battery
      by reformatt
      Looking for some advice on a 820-02016 board as I don't have much experience with these M1 machines. Learning the nuances of them as I go.

      So the history of this machine was it had been in a bag where a bottle of water leaked. Presented as dead about a month ago, corrosion was mainly around the battery connector and it's sub-PCB. Some corrosion was noted on the board around UC300, CC325, CW1C7, CW1C8. That was it really.

      Now without battery connected, USB-C will stay at 5V and cycle between 0 and 120ma. PPBUS_AON is cycling between 0 to 12.3V. If battery is connected,...
      10-12-2023, 04:36 PM
    • rookiecap
      fixing flat two tv screens
      by rookiecap
      I am trying to fix two flat tv screens. They have problems that I am not familiar how to deal with and if they are fixable at all.

      1) the first TV is RCA 32: LCD combo tv+dvd, model RLCDV3282A-B. It was distorting images in sync with sounds. The sounds were distorted too. Then it was shutting down automatically. I replaced all visible electrolytic capacitors on power supply board. After repair, the image and sound are restored but tv still shuts downs unexpectedly usually after couple of minutes. I do not know what to do next. What might be the culprit and how to trace/inspect...
      07-31-2024, 05:48 AM
    • zioricci
      Rejoin cut flat cable ?
      by zioricci
      Is there a way to rejoin the two parts of a cut laptop keyboard flat cable? I was thinking about silver paste but I don't know if it can be done well.

      I assume that the soldering iron can be left closed in the drawer....
      04-06-2023, 07:59 AM
    • bohaboha
      PHILIPS 32pfl3403d Flat-panel TV Upgrade Assistant problem
      by bohaboha
      Hi trying to update my Philips cause in retail mode not possible to get out from it i get this message in update site : Error message: no data exception. Your reference: Request ID (server_1930105)
      how to fix it thanks
      02-05-2025, 09:23 PM
    • Loading...
    • No more items.
    Working...