ALL LCD LED TV SERVICE MENU CODES
Service Menu Code with Board Name
China Universal Board / Jumper Board Service Menu Code
Changhong Ruba Service Menu Code
Ecostar LED TV Service Menu Code
Orient LED TV Service Menu Code
Haier LED TV Service Menu Code
TCL LED TV Service Menu Code
Samsung LED TV Service Menu Code
LG LED TV Service Menu Code
Videocon LED TV Service Menu Code
Supra LED TV Service Menu Code
Toshiba LED TV Service Menu Code
Symphony LED TV Service Menu Code
Veste/ LED TV Service Menu Code
Vision Quest LED TV Service Menu Code
Vizio LED TV Service Menu Code
Seiki LED TV Service Menu Code
RCA LED TV Service Menu Code
COBY LED TV Service Menu Code
Philips LED TV Service Menu Code:
ONIDA LED TV Service Menu Code
INTEX LED TV Service Menu Code
Telefunken LED TV Service Menu Code
Dazzle LED TV Service Menu Code
Micromax LED TV Service Menu Code
Skywarth LED TV Service Menu Code
Nobel TCL LED TV Service Menu Code
AOC LED TV Service Menu Code
Salora LED TV Service Menu Code
Shannon LED TV Service Menu Code
Alonso LED TV Service Menu Code
Shawnak LED TV Service Menu Code
General LED TV Service Menu Code
Royal LED TV Service Menu Code
Kraft LED TV Service Menu Code
LLOYED LED TV Service Menu Code
Devant LED TV Service Menu Code
Sanyo LED TV Service Menu Code
Beko LED TV Service Menu Code
Dynex LED TV Service Menu Code
Symphone LED TV Service Menu Code
Sharp LED TV Service Menu Code
Element LED TV Service Menu Code
Mitashi LED TV Service Menu Code
Sony LED TV Service Menu Code
Condor LED TV Service Menu Code
Daewoo LED TV Service Menu Code
-
Hi all,
I’m trying to recover a Samsung UE55HU8500L (curved UHD, 4K model from 2014) after replacing the panel. The new panel is a 55A1UU8EH, which produces excellent image quality — very close to the original.
However, since the swap, the TV enters a boot loop (Samsung logo → restart) unless I enter the service menu and perform a reset.
The service mode had been previously modified — possibly by a technician or during the panel swap — and I suspect some key settings are mismatched for the European (Greece) market.
Additional issues:... -
I was given this TV with little info. Was told that it didn't have a picture. Upon powering it up it displayed the Vizio logo and the menu was able to be displayed. I connected an antenna (OTA), did a channel scan which completed and the picture has been fine for days. The only issue is it has an initial blink code of 23 upon power off, followed by a 19 about 75 seconds later which then repeats the 19 code four more times. I haven't been able to find the process for entering the service menu nor do I have the service manual for this model (I do have the E60-C3 and E70-C3 service manuals but they... -
I am working on a QN750Q8FNBFXZA. Dead except the standby light. It blinks what appears to be 1 3 1 2. 1 long blink, pause, 3 short, pause, 1 long, pause, 2 short, pause, repeat. A service manual would be very helpful, or if anyone knows these error codes. Thanks! -
Hi,
I have JVC LT-32CA120
Board:Vestel 17MB171
I need rotate screen.It is possible in service menu and how to enter service menu?
Thanks. -
Hi,
I have just replaced led set of this vestel tv due to age.
I would like to reduce backlight from service mode. I have tried menu 4725 but in the menu i can't change anything.
Any help pls? I don't want to change from electronics inverter feedback resistor ideally.
Thanks again....