connector identification needed

skywalker · 07-11-2011, 02:19 PM

I am looking to source this connector, I have endlessly tried to search for the part but to no avail. this connector is widely used for connecting laptop modems Ethernet and bluetooth modules
Could anyone help me into sourcing this part
For size comparrison i have taken this picture next to a cpu

gretti · 07-19-2011, 11:23 PM

Looks like the standard connector from a laptop modem. Just cut one out of your nearest dead laptop. You know you can take the pin out of the connector and solder your wire to the pin, then just stick it back into the connector. I'm just saying because it sounds like you broke one.

skywalker · 07-20-2011, 02:30 AM

Yes this is missing a cable in the picture , I need about 100 of these connectors , Does anyone know where to purchase these from.

07-19-2011, 11:23 PM	#2
gretti New Member Join Date: Jan 2011 Posts: 18	Re: connector identification needed Looks like the standard connector from a laptop modem. Just cut one out of your nearest dead laptop. You know you can take the pin out of the connector and solder your wire to the pin, then just stick it back into the connector. I'm just saying because it sounds like you broke one.

07-20-2011, 02:30 AM	#3
skywalker Member Join Date: Jul 2010 Posts: 31	Re: connector identification needed Yes this is missing a cable in the picture , I need about 100 of these connectors , Does anyone know where to purchase these from.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode