FAQ? Replacing Al Electrolytic with Polymer Surface Mount

[lkvee]

I have an Element TV with bad caps. I don't have it around right now, so I can't provide model number, but I can provide which ones were bad (without the brand names):

1500 uF and 10V
680 uF and 10V
470 uF and 25V (there are three that have popped)

I'm in the process of acquiring replacements from reputable brands.

I have also acquired polymer caps at 680 uF and 25V. I don't know the brand name for these. The black seats are still present (these caps are loose now).

Can I use these polymer caps to replace the electrolytic 680 uF (10V) popped cap?

Thanks for reading!