Hi, I have an HP m8247c PC I am looking to replace some caps on.
This is the mobo
http://h10025.www1.hp.com/ewfrf/wc/d...roduct=3577592
There are 9 caps, 3 of which are bulging. They are TK 6.3V 1800uF rated at 105 degrees, only other markings are ATWB and 732A. I would like to replace all 9 as I am sure the remaining 3 are probably not far behind. Could you please point me in the direction of the proper caps on this site to replace these with?
Markings on the mobo are MCP61PM-HM REV: 1.0B if that helps.
Also there are 3 larger caps N6 KZ 16v 1800uF they are visibly fine but what can you tell me about these and should I replace them while I am at it?
Thanks!
This is the mobo
http://h10025.www1.hp.com/ewfrf/wc/d...roduct=3577592
There are 9 caps, 3 of which are bulging. They are TK 6.3V 1800uF rated at 105 degrees, only other markings are ATWB and 732A. I would like to replace all 9 as I am sure the remaining 3 are probably not far behind. Could you please point me in the direction of the proper caps on this site to replace these with?
Markings on the mobo are MCP61PM-HM REV: 1.0B if that helps.
Also there are 3 larger caps N6 KZ 16v 1800uF they are visibly fine but what can you tell me about these and should I replace them while I am at it?
Thanks!
Comment