Re: HP W2408 Problem
Hi - I would try reflowing the solder points on the resistors.
What make cap did you use to replace the startup cap?
I would replace the 3 1000uf caps then at least we know all the caps are good.
You should be using good quality low esr caps - panasonic or nichicon.
Hi - I would try reflowing the solder points on the resistors.
What make cap did you use to replace the startup cap?
I would replace the 3 1000uf caps then at least we know all the caps are good.
You should be using good quality low esr caps - panasonic or nichicon.
Comment