Hello.
I´m going to replace bad caps from a Syncmaster 226NW (same as 226BW but only VGA output). Caps are 5 x 820uf 25v (10x20 mm) and 1 x 330uf 25v (?x12 mm).
Is it ok to replace them with these (ESR question involved) :
820uf:
https://www.badcaps.net/store/produc...roducts_id=151
330uf:
https://www.badcaps.net/store/produc...roducts_id=166
or
https://www.badcaps.net/store/produc...products_id=52
Photos of bad caps following (front and back).
Thanks in advance.
I´m going to replace bad caps from a Syncmaster 226NW (same as 226BW but only VGA output). Caps are 5 x 820uf 25v (10x20 mm) and 1 x 330uf 25v (?x12 mm).
Is it ok to replace them with these (ESR question involved) :
820uf:
https://www.badcaps.net/store/produc...roducts_id=151
330uf:
https://www.badcaps.net/store/produc...roducts_id=166
or
https://www.badcaps.net/store/produc...products_id=52
Photos of bad caps following (front and back).
Thanks in advance.
Comment