I opened it to find 2 bad 56uF 25V nkcon capacitors on the High Voltage board. I replaced them with 100uF 25V Rubycon YXF.
Then I opened the power supply of the TFT, which is external. The psu is Delta Electronics, very well built. All the caps are Ltec, including the main cap, that looks slightly bulging. It is a 400V 120uF Ltec capacitor. The esr meter showed 114uF 0.50 esr, a bit on the high side.
The other caps on the video signal board are mostly Teapo and 1 Rubycon YXG. All of them were found ok.
It's not easy to find replacement capacitor for the main cap. I wonder how much that cap's high esr could affect the image of the monitor.
Then I opened the power supply of the TFT, which is external. The psu is Delta Electronics, very well built. All the caps are Ltec, including the main cap, that looks slightly bulging. It is a 400V 120uF Ltec capacitor. The esr meter showed 114uF 0.50 esr, a bit on the high side.
The other caps on the video signal board are mostly Teapo and 1 Rubycon YXG. All of them were found ok.
It's not easy to find replacement capacitor for the main cap. I wonder how much that cap's high esr could affect the image of the monitor.
Comment