I have just finished recapping the bloated 3300uf 6.3v caps on a Epox DAE
It sarted but the little BIOS LED display never went past the second value
stopped it depowered and did the CMOS thing fired her up and was just about to give up when bingo it posted.
Then after a run it shut it self off
DEAD no fan no post nuthin
Checked the soldering for dodgy dry joints all over redid the CMOS thing and it started
I got the screen here CPU 47C Chassis 32C which is the current air temp
I'll leave it run for a bit
Any suggestions?
It sarted but the little BIOS LED display never went past the second value
stopped it depowered and did the CMOS thing fired her up and was just about to give up when bingo it posted.
Then after a run it shut it self off
DEAD no fan no post nuthin
Checked the soldering for dodgy dry joints all over redid the CMOS thing and it started
I got the screen here CPU 47C Chassis 32C which is the current air temp
I'll leave it run for a bit
Any suggestions?
Comment