Hi Guys,
This is my first attempt at tv repair, i usually just do basic things like cap replacement on lcd monitors so my knowledge is not that much.
After opening the to measure standby voltage as there was no light in front of the tv, the board is eax55357701/32 as per pic and there's a burned trace to from what i assume is a transformer ?
My question then is whether i should get a board from ebay or this trace can be manually redone ? i.e. solder a wire from the leg of the transformer but to which point (s)
Thanks
This is my first attempt at tv repair, i usually just do basic things like cap replacement on lcd monitors so my knowledge is not that much.
After opening the to measure standby voltage as there was no light in front of the tv, the board is eax55357701/32 as per pic and there's a burned trace to from what i assume is a transformer ?
My question then is whether i should get a board from ebay or this trace can be manually redone ? i.e. solder a wire from the leg of the transformer but to which point (s)
Thanks
Comment