iConnect 621 ADSL modem router

[c_hegge]

I opened this router up today, just to see what was in it. It's working fine and the caps look OK, but I'm going to re-cap it as a preventative measure. The caps are as follows (biggest to smallest capacitance):

1x Koshin KR3 16v 3300uF (85*C Rated)
1x Samcon Unknown Series 10v 1000uF (85*C Rated)
2x Samxon GF 6.3v 470uF
2x Koshin KJH 10v 330uF

I'll probably use Rubycon YXF for the 1000uF 85*C rated cap and maybe for the smaller Koshin KJH. The spec sheets say that the YXF is lower impendance than the KJH). The big fella (the 3300uF) will be replaced with Panny FC and the Samxon GF with ???? Can someone please advise what the best replacments are? Options are:
NCC KXE or LXZ
Ruby YXG, ZL or MBZ
Panny NHG or FC
Nichicon HE

[c_hegge]

Re: iConnect 621 ADSL modem router

I've re-capped it, using some Sanyo WG for the Samxon GF. It seems to be working and I'm using it for this post.