Greetings! Can you guys help me? I have a Hp w2007 LCD Monitor, the problem is I'm having a white screen display. It has power but it only show white display. Thank you for the reply. Sorry for bad English
-
-
Re: HP w2007 LCD Monitor Problem
Check all cables - clean and reseat the one to the panel.
May be a fuse on the tcon board.
Welcome to the forum-
We can help a lot more if you please post good clear pictures of the whole chassis, and then pictures of each board, front and back and close up of connectors, (max resolution 2000x2000 and 2MB) using the manage attachments button, which is found by clicking "go advanced" under quick reply.
Please do not post inline and offsite as they slow down the loading of pages.
Examples of what is needed
https://www.badcaps.net/forum/attach...1&d=1290283049
https://www.badcaps.net/forum/attach...7&d=1280167246
It will be useful if you can say a bit about yourself - skills tools etc.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740 -
Re: HP w2007 LCD Monitor Problem
Greetings Sir. Here is the Pictures that you wanted. Sorry for the image I dont have HD Camera.Attached FilesComment
-
-
Re: HP w2007 LCD Monitor Problem
Have you tried the recommendations by selldoor?Originally posted by selldoor View Post--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: HP w2007 LCD Monitor Problem
I haven't but I will try. and I see a burnt part of the ribbon cable or LCD cable? I'll post pictures. I think it might be the problem.Attached FilesComment
-
-
Re: HP w2007 LCD Monitor Problem
Yes- cant see too well but if you mean the end three contacts yes they do look damaged and might cause the problem. Try gently cleaning them and flattening if bent more than it appears. You should also check if the socket is damaged/ burnt as that would be more difficult to repair/replace.Originally posted by rhaivhen View PostPlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: HP w2007 LCD Monitor Problem
the top right 3 pins? they do look different not sure why unless it was seated incorrectly.still try cleaning it and putting it back in to see if it works.
edit selldoor beat me to it! i was slow at typing lolComment
Comment