Hello,
This LCD set is not turning on.
Upon pushing the on off mechanical switch, the relay was heard for couple of tries but nothing came on the screen.
Now, without changing anything, the relay does not click anymore.
Only red standby led in front is on.
Attached:
1) Power Board pic (not mine but shopjimmy's)
2) A Toshiba report I found about an Q801 STR-Z4569 and near it, a big blue poly cap C803 that may burn out...
Is this fault only related to main power board?
I'm not sure how to test these and I could not obtain the schematics - can you help with guidance?
This LCD set is not turning on.
Upon pushing the on off mechanical switch, the relay was heard for couple of tries but nothing came on the screen.
Now, without changing anything, the relay does not click anymore.
Only red standby led in front is on.
Attached:
1) Power Board pic (not mine but shopjimmy's)
2) A Toshiba report I found about an Q801 STR-Z4569 and near it, a big blue poly cap C803 that may burn out...
Is this fault only related to main power board?
I'm not sure how to test these and I could not obtain the schematics - can you help with guidance?
Comment