Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

vizio gv47lfhdtv10a bad t-con!?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    vizio gv47lfhdtv10a bad t-con!?

    Just got this on the super cheap, panel turns on and works the menus look fine, when a picture is on the screen you can see the picture is starting to look solarized.

    Before I tear into it, I am making a thread.

    Here is a photo of the screen in action.

    I will take the back off in a day or two.





    #2
    Re: vizio gv47lfhdtv10a bad t-con!?

    I would re-seat the cables on the T-CON and on the main board, then check the GAMMA Voltages on the T-CON.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #3
      Re: vizio gv47lfhdtv10a bad t-con!?

      Will do, the menus seem unaffected with or without a picture.

      Comment


        #4
        Re: vizio gv47lfhdtv10a bad t-con!?

        Gamma voltages are fine, here is where it gets strange. This is supposed to be 1080p according to the fancy placard on the front of the unit.

        When the source is at 1080p the picture looks like it does in the photo above. When set to any other resolution the picture is fine.


        So this leads me to believe the mainboard is shot.

        Comment


          #5
          Re: vizio gv47lfhdtv10a bad t-con!?

          HDMI controller was going out, replaced the mainboard and it is now working as intended.

          Comment


            #6
            Re: vizio gv47lfhdtv10a bad t-con!?

            I have the same model GV47LFHDTV10A that has a damaged main board.Anybody have the actual schematic for it?I can only find trouble shooting charts for and I need a true schematic that shows me what parts connect to what.Also if you've the schematic for the audio board and anything else it would be much appreciated.I've had the set sitting in storage so I can give the actual board part numbers but I'd love to fix it.Thank you in advance

            Comment

            Working...
            X