Part identification

[zenerdiode]

Working on a Dell monitor 2407 series Board 4H.L2K02.A01 I need to idnetify the value of R 768 and transistor Q 654. Anyone know these values. etc thanks

[selldoor]

Re: Part identification

Ok - you have posted this in the wrong forum?
Have you even tried the search facility in the bar above?
The information is there.

[zenerdiode]

Re: Part identification

I am having trouble using the sight . Something about security certificate?
So I still cnat gain the info sought.

[selldoor]

Re: Part identification

You should be ok now you have done a couple of posts . Doesnt seem to be a site problem and you dont even need to be logged on to use the search facility.
Were you searching or trying to upload pictures of your boards, If the latter
post good clear pictures of the whole chassis, and then pictures of each board, front and back (in the same orientation) and close up of connectors, (max resolution 2000x2000 and 2MB) using the manage attachments button, which is found by clicking "go advanced" under quick reply.

Please do not post inline and offsite as they slow down the loading of pages.

Examples of what is needed

https://www.badcaps.net/forum/attach...7&d=1280167246

https://www.badcaps.net/forum/attach...6&d=1280167246

https://www.badcaps.net/forum/attach...4&d=1280167246

[opamp]

Re: Part identification

I am having trouble using the sight . Something about security certificate?
So I still cnat gain the info sought.

Make sure the date, time and year are set correct in your computer. This will help with the security certificates.