The electronic theory says "connecting capacitor in series will give the higher voltage tolerance, but lower capacitance in the same fashion of connecting resistor in the parallel will give higher power tolerance but lower resistance".
However, I've got some idea of "balance charging". Giving 3 capacitors of 1F @4.3V each connected in series with 4 pins like
G|____c1_____|______c2______|______c3_____|+ and charge them like li-po battery. I'm wondered if that will result in 1F capacitor @ 12.6V with no capacitor boomed?
However, I've got some idea of "balance charging". Giving 3 capacitors of 1F @4.3V each connected in series with 4 pins like
G|____c1_____|______c2______|______c3_____|+ and charge them like li-po battery. I'm wondered if that will result in 1F capacitor @ 12.6V with no capacitor boomed?
Comment