This one also won't power up, the LED on the front just flashes orange and blue. When plugged in it gives that high pitched whine sound. Getting 165.5V across the input cap, the voltage regulators are giving out proper voltage on the main board (going from right to left in the picture):
#1
Pin 1 = 0.00V
Pin 2 = 3.31V
Pin 3 = 5.10V
#2
Pin 1 = 0.00V
Pin 2 = 1.80V
Pin 3 = 5.10V
#3
Pin 1 = 0.00V
Pin 2 = 3.30V
Pin 3 = 4.78V (Seems pretty low)
The whine on the power supply would change pitch when testing the regulators. Also, the fuses test fine. When unplugged the whine goes away immediately.
#1
Pin 1 = 0.00V
Pin 2 = 3.31V
Pin 3 = 5.10V
#2
Pin 1 = 0.00V
Pin 2 = 1.80V
Pin 3 = 5.10V
#3
Pin 1 = 0.00V
Pin 2 = 3.30V
Pin 3 = 4.78V (Seems pretty low)
The whine on the power supply would change pitch when testing the regulators. Also, the fuses test fine. When unplugged the whine goes away immediately.
Comment