Noise in image on Viewsonic VX2255WMB

[VuDkA]

Hi all!
I have a Viewsonic VX2255WMB which stopped from powering on. So I looked for the problem on the capacitors and I found three of them that were bad (See image below). Then I reassembly the monitor and it dit power on, but the image was not clear, it looks like there is some interference, I attached three images to show you the problem.
Do you think that this can still be an issue on the power board? should I replace all capacitors?
I hope that one of you could give me some guidance about what is happening to my monitor and how could I fix it.
Thanks.
Oscar

[budm]

Re: Noise in image on Viewsonic VX2255WMB

The LVDS cable (the cable between the panel and the main board) is seated properly at both ends? All the circuit board mounting screws are tight? You may have bad caps on the main board.

[VuDkA]

Re: Noise in image on Viewsonic VX2255WMB

Thanks for your answer!
I just looked again on the board and there was one cap that it was not well in contact in the power board.
My display has returned to life.
Thank you again.

[budm]

Re: Noise in image on Viewsonic VX2255WMB

Thank you for reporting the result.