Announcement

Collapse
No announcement yet.

ASUS P6T Trouble 4 slot memory

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    ASUS P6T Trouble 4 slot memory

    Hello guys! I'm a fan of this forum and I've seen that the staff is very willing to help! I have here 2 motherboards ASUS P6T and biostar x58. The two have similar problems. Of the 6 memory banks only 2 are working. all banks have 1.5V but 4 do not work. Could someone help me or give me the schematic of these boards? Many thanks from Brazil!

    #2
    Re: ASUS P6T Trouble 4 slot memory

    Try another CPU
    High Res Pic of the Socket?

    Comment


      #3
      Re: ASUS P6T Trouble 4 slot memory

      This board as its specs mention , work as Triple channel memory architecture , meaning Channels A, B, and C , and you have to fit two modules in each channel to make it work perfectly .

      Also the Rams modules should be of the same frequency .

      Comment


        #4
        Re: ASUS P6T Trouble 4 slot memory

        AH and don't forget you have to put the memory in 'the right' slots!!
        With the P6T AFAIR it was the orangish ones.

        If you put it in the black ones, CPU won't detect it.
        Shitty Intel Memory Controller for their High(er) End Processors...

        With LGA2011 (Sandy-E) it's worse. If you put one memory DIMM in the wrong slot, it won't boot. LGA1366 will boot but just doens't detect the memory.
        Last edited by Stefan Payne; 06-17-2017, 03:50 AM.

        Comment

        Working...
        X