Hi,
Another day, another DAY11AMB6E0 board.
Was completely dead because of liquid damage. Not tuning on, no lights. Replaced KBC and BIOS chip (couldn't read it) and I got it to turn on but there was no VCore and battery was not charging. Replaced PR97 (PR26 on the schematics, turned into something like 3K so NC81118 wasn't powered) and PR74 (fell of the board) and now I get VCore. There was also a shorted caps on BATCHG line so replaced it and now battery charges.
Problem: when I turn it on, caps lock blinks 3 times and nothing else happens.
HP says this is a RAM issue, but +1.35VSUS is ok and RAM slots look good.
Since I pulled the BIOS chip from the other board I think the BIOS ROM won't work on this one.
Can anyone send me a dump of HP Pavilion 15-p083sa BIOS please?
Thanks,
Another day, another DAY11AMB6E0 board.
Was completely dead because of liquid damage. Not tuning on, no lights. Replaced KBC and BIOS chip (couldn't read it) and I got it to turn on but there was no VCore and battery was not charging. Replaced PR97 (PR26 on the schematics, turned into something like 3K so NC81118 wasn't powered) and PR74 (fell of the board) and now I get VCore. There was also a shorted caps on BATCHG line so replaced it and now battery charges.
Problem: when I turn it on, caps lock blinks 3 times and nothing else happens.
HP says this is a RAM issue, but +1.35VSUS is ok and RAM slots look good.
Since I pulled the BIOS chip from the other board I think the BIOS ROM won't work on this one.
Can anyone send me a dump of HP Pavilion 15-p083sa BIOS please?
Thanks,
Comment