Announcement

Collapse
No announcement yet.

No red

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No red

    LG 42LC4R -2007 model.
    Came in with no power and 5 bad caps, which I replaced and it came on nicely, except that there is no red colour - very weak picture with a little bit of red if Standard setting is selected.
    On Standard and/or Dynamic is very weak.
    Only under "User 1" and/or 2 I get a bright picture, but no red.

    #2
    Re: No red

    Check LVDS cable is fully seated. Try full factory reset. Check Red Gain and Red Offset in the service menu, if available.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: No red

      Thanks a lot for those suggestions.
      LVDS cable was carefully checked as soon as I noticed the fault and it was firmly plugged in; even shook it a little to make sure. It's not it.
      Also the resetting in the menu doesn't help a thing.
      Since there is a minimal amount of red when on dynamic picture [only gives a dark picture], but noting on User, I'm puzzled.

      Comment

      Working...
      X