I am experiencing a problem with my Hanns-g Monitor and before I delve into opening it I would like to know what i should be looking for other than bulging caps.
Basically The monitors backight turns onand off it appears as I cant see nothing. Everything else works fine however i do notice that it flickers alot depending on what screen Resoloution its set at, the lower the less flicker the higher the more flicker sometimes its stable for ages then flickers and gets worse
At present its flickering quite a bit and going from 1920x1200 to 800x600 causes it to stay on and not flicker
What can i do about this! or look for
Is it a power issue
I have taken apart the monitor just now! and seems fine capacitor wise, ill have to try and work out which 1 is faulty how?
Basically The monitors backight turns onand off it appears as I cant see nothing. Everything else works fine however i do notice that it flickers alot depending on what screen Resoloution its set at, the lower the less flicker the higher the more flicker sometimes its stable for ages then flickers and gets worse
At present its flickering quite a bit and going from 1920x1200 to 800x600 causes it to stay on and not flicker
What can i do about this! or look for
Is it a power issue
I have taken apart the monitor just now! and seems fine capacitor wise, ill have to try and work out which 1 is faulty how?
Comment