the ac mains plug is burned,one leg in the board is damaged,
fixed with one leg of 1w resistor
now the "2 seconds to black"
in the inverter side have one LM358,
OZ960 ccfl controller
and a pair of double mosfet's APM9932
I measured first the mosfet's for shorts and seems to be ok,
but i tried to change with a pair of 4542 from another hyundai 17"
with no luck.
i change the lm358,but no is the problem here.
finally ,changed the OZ960 (with my 30w pencil!!!) and the monitor
now is back to life.
I don't have photos of the board.Now, I search in the forum and attach here
sorry for my poor english,
regards!
photos from here:
https://www.badcaps.net/forum/showthread.php?t=8973
fixed with one leg of 1w resistor
now the "2 seconds to black"
in the inverter side have one LM358,
OZ960 ccfl controller
and a pair of double mosfet's APM9932
I measured first the mosfet's for shorts and seems to be ok,
but i tried to change with a pair of 4542 from another hyundai 17"
with no luck.
i change the lm358,but no is the problem here.
finally ,changed the OZ960 (with my 30w pencil!!!) and the monitor
now is back to life.
I don't have photos of the board.Now, I search in the forum and attach here
sorry for my poor english,
regards!
photos from here:
https://www.badcaps.net/forum/showthread.php?t=8973