Hi, a recent lightning storm has left me with 2 LCDs and 2 Satellite boxes malfunctioning so rather than see them go to landfill I'm starting out on repairs and need some newbie guidance, thanks:
My HP monitor (2309m, LG23" screen) won't turn on at all - it usually has a blue LED when on/nothing when off. If I plug in, LED is white all the time. I stripped the unit down, no obvious damage to either board or caps.
I checked the power from the power supply pinouts to the controller board but have no guide to know which ones are which, I have ten in total:
2 red are giving 5v,
1 blue = 2.65v
1 green = 0.45v
The rest have no voltage. This is in standby mode.
I have checked resistance on (what I think is) the primary fuse - shows 0.3ohm - see pic attached for what I am testing.
Any guidance from the experts here? thanks in advance
My HP monitor (2309m, LG23" screen) won't turn on at all - it usually has a blue LED when on/nothing when off. If I plug in, LED is white all the time. I stripped the unit down, no obvious damage to either board or caps.
I checked the power from the power supply pinouts to the controller board but have no guide to know which ones are which, I have ten in total:
2 red are giving 5v,
1 blue = 2.65v
1 green = 0.45v
The rest have no voltage. This is in standby mode.
I have checked resistance on (what I think is) the primary fuse - shows 0.3ohm - see pic attached for what I am testing.
Any guidance from the experts here? thanks in advance