Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

HITACHI L42VK04U Won't turn on, interface still responds

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    HITACHI L42VK04U Won't turn on, interface still responds

    Hi guys,

    I've got a hold of an HITACHI L42VK04U, the machine will not turn on at all. However the touch sensitive buttons do emit a tone each time you touch them, like they should. The machine has a Vestel 17MB65-2 mainboard and a 17PW26-5.

    After testing the power supply I've found that the standby votages seem to be okay, ie the 5V and 3.3V. I also checked D881 (I believe that is the correct number, it's next to C850 and C991) and that is working fine. There's no tell tale signs of bulged capacitors either.

    Could any advise me on where to go from here please?

    TIA for any help
    http://www.technciallysmart.co.uk - Some helpful info under Fix It Yourself
    Tags: None
    #2
    Re: HITACHI L42VK04U Won't turn on, interface still responds

    Just an update but I tried pulling the ST_BY both high and low and I couldn't get the 30V and 24V lines to do anything so my guess is that the power board is the issue. Anyone care to confirm this before I order a new PCB? Cheers again
    http://www.technciallysmart.co.uk - Some helpful info under Fix It Yourself

    Comment

      #3
      Re: HITACHI L42VK04U Won't turn on, interface still responds

      well, it wasn't the power board. unsure why I can't get the correct voltages to appear but a replacement board does the same thing as the old one
      http://www.technciallysmart.co.uk - Some helpful info under Fix It Yourself

      Comment

      Previous template Next
      Working...
      X