msi 6120 poly

[kc8adu]

intercepted this from the trash.neighbor was going to pitch it.
he had tried to recap with radioshack caps.looked like shit.
oddly the vrm on one cpu has 8 output caps and the other only 7.
yes i double checked to be sure.
2x 1ghz/100/256 slot 1 chips.i remember when these were scarce as hens teeth and very expensive!

[Toasty]

Re: msi 6120 poly

Sweet!



Is the Ecrater site gone?

[Topcat]

Re: msi 6120 poly

Nice work! I've been poly'ing more and more boards these days too!

[kc8adu]

Re: msi 6120 poly

the ecrater site is still there.
havnt added much in a while as i have been busy.
bigger fish to fry as they say.

[kc8adu]

Re: msi 6120 poly

did a bh6 for a friend.it was an emergency job for a homebrew cnc computer.
it was always a bit shakey.polys on vcore and vdimm.also on +3.3.
so old school stuff responds well.
eliminated the quirks.
since tayeh are junk when new i wonder how many were scrapped as being buggy when nearly new.

[Topcat]

Re: msi 6120 poly

I have a KA7 I may give it a whirl on. I think vcore on those is 2.8v, so I'll have to use the 560uF 4v polies on it.

[kc8adu]

Re: msi 6120 poly

iirc even slot a chips cant stand more than about 2.2
i would use the 820's.install cpu and goldfinger,and play.
of course the 560@4 will be great on vdimm and anywhere +3.3