HP G56 Bios dump needed

[claudyu07]

Hi guys,
Need bios dump for HP G56-107sa
Motherboard DAAX3MB16A1 REV.A
INTEL CPU, DDR2 RAM

Thank you!

[mielta]

Re: HP G56 Bios dump needed

Hi

Try this

[claudyu07]

Re: HP G56 Bios dump needed

i have this one from hp website.
However my programmer EZP2011 is saying ''file too long'' when i load it.
anyway i have flashed like this but is no power at all. With the original bios was turning on with black screen
i can confirm is a 2Mb bios but not this one.
Thanks

[ahmad.qralh]

Re: HP G56 Bios dump needed

Tr this

[mielta]

Re: HP G56 Bios dump needed

Hi
Try this

[claudyu07]

Re: HP G56 Bios dump needed

Tr this

Turns on,fan spin and off after half second

[claudyu07]

Re: HP G56 Bios dump needed

Hi
Try this

no power at all with this

[ala_borbe]

Re: HP G56 Bios dump needed

post your old bios pls

is yout board
DAAX3MB16A1
or
DA0AX3MB16A1
????

[claudyu07]

Re: HP G56 Bios dump needed

the board is DAAX3MB16A1 REV.A.
can confirm ahmad.qralh's bios is working .
The board has another problem i will look for schematic .
Mosfet PQ39 shorted, mosfet on the left of PQ39 totally burned and broken traces.
will try to identify them and restore traces.
schematic is here:

If anyone has board view please

Thanks

[claudyu07]

Re: HP G56 Bios dump needed

pq39 resistance between pins 5,6,7,8 and ground only 9-10 ohms?
is this correct?

[meritosari]

Re: HP G56 Bios dump needed

If anyone has board view please

Thanks

https://elektrotanya.com/hp_g62_g72_.../download.html

[claudyu07]

Re: HP G56 Bios dump needed

Thanks. everything looks ok but don't understand if the resistance should be that low between pins 5,6,7,8 and ground only 9-10 ohms on PQ39?
Thanks

[toufik sat]

Re: HP G56 Bios dump needed

Thank you!

[toufik sat]

Re: HP G56 Bios dump needed

Thank you!