Just fixed/modded one of these. Filled with OST and L-Tec caps. No bulging but a lot of mediocre (in case of OST) and bad readings on some of the Ltec caps.
A weird mix of Nichicon PW, HD, HM and UCC KZE was used to recap it. Mouser's stock was funny this time.
The main switching MOSFET isnt very good and has a drain-source on resistance of almost two ohms. Swapping this for something more modern results in a cooler running supply. You can FEEL the difference! 2SK2654 was swapped for a Fairchild FQA8N100C.
Fan was good, unlike the other version of the supply I'm used to (Hipro IIRC). The Lite-ON uses a 60x15mm fan, the other takes a skinny 60x10mm.
The mobo is weird on this one...all Rubycon MCZ and Panasonic FL except for three Nichicon HNs. Why didn't they go all the way?
A weird mix of Nichicon PW, HD, HM and UCC KZE was used to recap it. Mouser's stock was funny this time.
The main switching MOSFET isnt very good and has a drain-source on resistance of almost two ohms. Swapping this for something more modern results in a cooler running supply. You can FEEL the difference! 2SK2654 was swapped for a Fairchild FQA8N100C.
Fan was good, unlike the other version of the supply I'm used to (Hipro IIRC). The Lite-ON uses a 60x15mm fan, the other takes a skinny 60x10mm.
The mobo is weird on this one...all Rubycon MCZ and Panasonic FL except for three Nichicon HNs. Why didn't they go all the way?
Comment