Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

80GL17T-40-V / Dell E178WFPC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    80GL17T-40-V / Dell E178WFPC

    Hello,

    Does anyone on this site know where I can get one of these tranformers?

    It has the number 80GL17T-40-V on it. Its on a Dell E178WFPC inverter board.
    When I first opened this monitor I found that one set of ccfl wires were burnt.
    So I cut out the burned sections and soldered the ends and applied heat shrink tubing over each wire and then over the set of wires. Its emitting that ozone smell when turned on. I found a transformer on Ebay, but don't really want to wait about a month to receive.

    Let Me Know,
    lcdman

    Attached Files

    #2
    Re: 80GL17T-40-V / Dell E178WFPC

    It seems to me that the transformer is putting out the high voltage but there is arcing somewhere in the connection. Can you look the board in the really dark room to see if you can see any arcing?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #3
      Re: 80GL17T-40-V / Dell E178WFPC

      Did you test the transformer
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

      Comment


        #4
        Re: 80GL17T-40-V / Dell E178WFPC

        Hello Budm,Selldoor,

        I didn't see any arcing. I didn't test the transformer. But I can smell ozone and hear an arcing type noise emitting from it. I did desolder it and apply 60/40 solder to the terminals,no change. Thats why I want to replace it. I wouldn't want to sell it doing this.

        Thanks As Always,
        lcdman

        Comment


          #5
          Re: 80GL17T-40-V / Dell E178WFPC

          Hmmm .....

          Originally posted by lcdman View Post
          ..... Its emitting that ozone smell when turned on. .....
          That ozone smell could indicate a broken ccfl ..... Perhaps you'd want to take a look again at the lamps?

          Comment


            #6
            Re: 80GL17T-40-V / Dell E178WFPC

            Hello All,

            This monitor came to me not working correctly. After I opened and repaired the burnt ccfl wires on one set of ccfls, the monitor is now working. Still hear the transformer emitting a screeching noise and making that ozone smell. I then recapped the board except the large one on its side. No change. Removed and re-soldered the transformer with 60/40. No change. So I just need a new transformer and don't want to wait about a month to receive from China.
            Does anyone know of a domestic source for such a unit?

            Take Care,
            lcdman

            Comment


              #7
              Re: 80GL17T-40-V / Dell E178WFPC

              I thought I had you covered in my box of scrap parts, but

              Three that I found have the following part number:
              80GL19T-8-V 1
              TPV 0618

              Two that I found have the following part number:
              80GL19T-8-DN 1
              DARFON 60 1

              Comment

              Working...
              X